442783
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
HI GAIN MASTER VOLUME SL-X
The latest innovation from our valve designers involves the use of an extra ECC83 pre-amp valve in the gain
stage of the Master Volume SL-X models.
This gives a gain soaked front end that is the most extreme yet produced by Marshall and is controlled by twin
gain controls, the first (item 2), from 0-10, the second (item 3), from 10-20! Combinations of these two
controls can take you from classic Marshall crunch in lower positions, to pure overdriven outrage on
maximum. It is well worth experimenting with these twin gains in conjunction with the tone network (items
6-9) to really get to know the full capability of your new SL-X head.
The twin Master Volumes (items 4 & 5) are another unique feature of the SL-X amp giving you two
footswitchable output volume levels, ideal for rhythm to solo switching.
Although a clean sound is available, this amp was designed for the uncompromising high gain player who
demands a no compromise sound.
HI GAIN DUAL REVERB
The Dual Reverb range was designed for versatility with two independently controlled footswitchable
channels, each voiced totally differently.
Channel A is voiced for brilliant clean tones with the gain control (item 2) on lower settings and crunch to
lower gain lead as you turn it up.
Channel B is boosted with enough gain (item 3), for fearsome lead tones, ranging from classic on lower
settings to contemporary screaming solos on maximum.
Channel master volumes (items 9 & 11) and individual channel reverb controls (items 8 & 10) give you
incredible control and all round versatility in either, head or combo form.
VALVE OUTPUT POWER
The JCM 900 range use high quality 5881 output valves (x2 in 50 Watt models, x4 in 100 Watt models) for
their unique distortion properties and fluid tone.
With most valve amplifiers, particularly Marshalls', the best sounds are achieved when the Master Volumes
are set high enough to be utilising the driving power of the output valves to the full.
This delicate working balance between the pre-amp and power amp levels can only be achieved by
experimentation.
You will find that all the JCM 900 models like to work hard and are designed to withstand prolonged use at
full power quite readily. The PB100 Power attenuator is ideal for this use (connects between amp and
cabinets) as it will allow you to run your amp at full power but keep the overall volume low.
The important thing to remember here is that it is the interaction between all the controls that plays a part in
achieving your sound.
HI GAIN MASTER VOLUME 900 SL-X
FRONT PANEL FUNCTIONS
Models 2100 & 2500
1. Input Jack
Connects the instrument to the amplifier. (A high quality screened lead must be used).
2. Pre-Amp Volume Control
Sets the initial gain level of the pre-amp section (0-10). Lower settings for clean sounds - higher settings for
crunch and overdrive.
3. Gain Sensitivity Control
Sets the secondary gain level of the pre-amp section (10-20).
3
NOTE:
Combinations of the two gain controls (items 2 and 3) provide a wide range of clean, crunch and overdrive
possibilities. Experimentation will reveal the optimum settings for each.
4 & 5. Master Volume “A” Master Volume “B”
Twin footswitchable Master Volume Controls. Master “B” controls the overall volume exclusively when a
footswitch is not connected. The connection of footswitch P801 allows switching between Master “A” or “B”
giving independent volume levels for rhythm and solo playing.
6,7,8 & 9. Treble, Middle, Bass & Presence
Passive equalisation circuit. These controls are interactive to provide the maximum range of tonal variation.
10. Master Volume B “ON” LED Indicator
Indicates red when Master Volume “B” is selected.
11. Footswitch Jack Socket
Input for the connection of remote footswitch (model P801).
12. Standby Switch
Controls the H.T. supply to the amplifier valves. Allows the filaments to remain heated during breaks.
13. Power Switch
On/Off switch for total mains power to the amplifier.
HI GAIN DUAL REVERB
FRONT PANEL FUNCTIONS
Models 4100, 4101, 4102, 4500, 4501 & 4502
1. Input Jack
Connects the instrument to the amplifier. (A high quality screened lead must be used).
2. Channel “A” Pre-Amp Gain Control
Sets the gain level for channel “A”. Lower settings give clean sounds - higher settings for medium drive and
crunch rhythm.
3. Channel “B” Lead Gain Control
Sets the gain level for boosted Channel B. Lower settings give slight overdrive - higher settings for maximum
drive and sustain.
4,5,6 & 7. Treble, Middle, Bass & Presence
Passive rotary equalisation circuit. These interactive controls provide a wide range of tonal possibilities for
both channels.
8. Reverb Control Channel A
Controls the amount of reverb on Channel “A”.
9. Master Volume Channel A
Controls the overall volume level of Channel “A”.
10. Reverb Control Channel B
Controls the amount of reverb on Channel “B”.
11. Master Volume Channel B
Controls the overall volume level of Channel “B”.
12. Channel B ‘ON’ Push Switch/LED
Indicates red when Channel “B” is selected either manually or by remote footswitch (models P802).
13. Footswitch Jack Socket
Connects the remote dual footswitch (models P802) for reverb ON/OFF and Channel A/B switching.
14. Standby Switch
Allows the amplifier to remain at “standby” (i.e. the valve heaters remain on, ready for instant use, but
without the signal circuit being active).
15. Power Switch
On/Off switch for total mains power to the amplifier.
4
SL-X hbk 4/3/05 12:22 pm Page 4
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marshall JCM 900 valve series SL-X Master Volume Dual Reverb bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marshall JCM 900 valve series SL-X Master Volume Dual Reverb in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info