498466
6
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
11
10
P/N:570-T1A602-01
HEXAGON
NUT
HEXAGON BOLT
MOUNTING CASE
CONSOLE
METAL
MOUNTING STRIP
DASHBOARD
INSTALLATION
UNIT REMOVAL
1. Remove Front Control Panel and Frame.
2. Slightly insert the key into the slot and gently to
release.
3. Separate the mounting case from the unit. Keep
removal keys in a safe place as you may need for
future removal of unit.
REMOVAL KEYS
WARNING!!
Remove the two small
screws before
operating the unit.
CAUTION : DO NOT PLACE THE UNIT
OVER THE MAXIMUM INSTALLATION
ANGLE OF 30°. OTHERWISE, THE UNIT
MAY NOT WORK PROPERLY.
ISO CONNECTION
B
A
IGNITION
GROUND
MEMORY
CARSTEREO ISO-CONNECTION
POWER
FROM CABLE SIDE
2
4
6
8
1
7
5
3
POWER
ANTENNA
LEFT REAR +
LEFT FRONT +
RIGHT FRONT +
RIGHT REAR +
LEFT REAR
LEFT FRONT
RIGHT FRONT
RIGHT REAR
CARSTEREO ISO-CONNECTION
FOR 4 SPEAKERS
FROM CABLE SIDE
2
4
6
8
1
7
5
3
ANTENNA
RCA LINE OUT
10
FUSE 10A
A
B
FILE SEARCH
l Press “AMS” button for more than 2 seconds, then press once and “FILE SCH” will be shown
on the display.
l Press “VOL/SEL” button to enter file search mode.
l Rotate “VOL/SEL” button clockwise or anti-clockwise to view the directories.
l After the selected directory is selected, rotate “VOL/SEL” button clockwise or anti-clockwise to
view the files.
l Press “VOL/SEL” button to play the selected file.
l If directories or files name is not entered within 10 seconds, the unit will continue playing the
current file.
CHARACTER SEARCH
l Press “AMS” button for more than 2 seconds, then press twice and “CHAR SCH” will be
shown on the display.
l Press “VOL/SEL” button to enter into character search mode and “ * ” will appear on the
display for you to enter first character.
l Enter whole name of files (maximum 8 characters) by rotating “VOL/SEL” button clockwise or
anti-clockwise to shift “A-Z”, “0-9” & “*” (space) in loop rotation.
l Press “VOL/SEL” button shortly to select the first character.
l Repeat the same procedure to enter the other characters if required.
l After the whole name of file is entered, press “VOL/SEL” button more than 2 seconds to start
playing the selected track.
Remark :
1) The media must contain directories or files name written by the CD / USB flash memory /
SD card writer in order to use in searching.
2) If only partial letters are entered for searching either in directories or files name, you may
not get it correctly.
IMPORTANT NOTES
l The MP3 file recording media acceptable to this unit are CD-R/RW, USB flash memory, SD card.
l The MP3 formats acceptable are limited.
l Do not attempt to play a media containing non-MP3 files. Otherwise, the radio may not work
properly.
MP3 OPERATION
13. VOLUME/SELECTION (“VOL/SEL”)
a)Rotate this button clockwise to increase volume level and vice versa.
b)Press this button shortly to show Volume/Bass/Treble/Balance/Fader control. Then, rotate clockwise to
increase setting level and vice versa.
c)Press this button more than 2 seconds, it activates the selection mode in cyclical position by clockwise
for increase and vice versa.
Remark : “MULT OFF/ MULT ON” and “BEEP ON/ BEEP OFF” are not available for this model.
14/15. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN
On radio mode, pressing this button more than 2 seconds, it will tune one frequency step higher or lower. On
CD/USB/SD mode, pressing this button shortly will move to the one track higher or lower. Pressing more than
2 seconds, it will move fast forward or backward to a specific position.
TRACK SEARCH
l Press “AMS” button for more than 2 seconds and “TRK SCH” will be shown on the display.
l Press “VOL/SEL” button to enter track search mode and “TRK 0” will appear on the display for
you to enter track number.
l Rotate “VOL/SEL” button clockwise or anti-clockwise to shift number 0 - 9 in loop rotation.
l Press “VOL/SEL” button shortly to select the first digit.
l Repeat the same procedure to enter the other digits if required.
l After the track number is selected, press “VOL/SEL” button more than 2 seconds to start
playing the selected track.
l If track number is not entered within 10 seconds, the unit will continue playing the current file.
18. AUXILIARY INPUT
Press MODE button (9) until the “AUX” mode is shown on display. The unit is ready to play files from the
external audio device through the auxiliary input directly on the front panel.
19. SD CARD SLOT
Press MODE button (9) until the “MEM-CARD” mode is shown on display. The unit is ready to play files
from the SD card.
20. USB HOST
Press MODE button (9) until the “USB-DRIV” mode is shown on display. The unit is ready to play files
from the USB device.
Note: the unit can only support FAT32 HDD format; cannot support FAT & NTFS formats.
17. RESET
The reset button is located on the front of main panel. This reset circuitry is provided to protect the unit's
microprocessor. It should only be activated under the below conditions. Whenever the reset button is
activated, all preset memories content will be erased.
a) Initial installation after all wiring is completed.
b) Abnormal operation.
On CD / USB / SD Mode
lPreset 1 - press this button to pause the track.
lPreset 2 - press this button to scan the first 10 seconds of all the tracks.
lPreset 3 - press this button to repeat the track.
lPreset 4 - press this button to play the tracks in random order.
lPreset 5 - press this button to search -10 tracks (For USB/SD mode only).
lPreset 6 - press this button to search +10 tracks (For USB/SD mode only).
16. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each
preset button can store FM1, FM2, FM3, MW1, MW2 band station frequency. Pressing the button momentarily
recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing
18FM / 12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station
frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the
button once.
The radio will stop on station transmitting the selected PTY code. During program type is searching, it can
stop searching and the radio will back to the original station. “PTY NONE” will appear if selected PTY code
is not receivable.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marquant MCR-1401 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marquant MCR-1401 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info