487659
57
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
27
FONCTIONNEMENT
- Listening to Traffic Announcement
TA button is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
In any mode, when TA mode is on and
a traffic announcement is transmitted,
the unit will switch temporarily to radio
mode and play the traffic
announcement. And when finished
playing it will switch to previous state.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min.
TA volume level), it will be set to the
last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
When listening the traffic
announcement, if you press the TA
button, the traffic announcement will
be interrupted, but the TA mode is still
on. In this mode, you can press
MODE button to change mode to TA
mode and listen to traffic
announcement. Press TA button again
will stop the current traffic
announcement. And the unit will return
to its original station.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement
Identification
Identification data showing traffic
information is being transmitted
or not
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
FONCTIONNEMENT AV
Basculer en mode AV
Il y a une paire de jacks AUDIO/VIDEO
INPUT à l’avant et à l’arrière de l’appareil.
Lorsque vous reliez le système audio/vidéo
à ces prise, appuyez sur le bouton MODE
de la télécommande ou sur le panneau
avant pour sélectionner le mode AV.
FONCTIONNEMENT DE LA LECTURE
USB
A l’arrière de l’appareil, il y a une prise
USB. Un pilote USB peut être connecté
par cette interface. (fonctionnement)
1) Reliez le pilote USB à l’interface USB,
l’appareil lira automatiquement les
fichiers enregistrés sur le périphérique
USB.
2) Lorsqu’un disque est présent dans la
fente, reliez le port USB à l’interface
USB, l’appareil lira le disque.
Appuyez sur le bouton
(stop) ou
(pause) de la télécommande ou sur le
bouton /MUT du panneau avant
pour entrer dans le mode STOP ou
PAUSE. Appuyez ensuite sur le bouton
GOTO pour lire le périphérique USB.
L’appareil principal ne supporte que
les disques de mémoires USB qui
sont approuvés par Microsoft.
Le lecteur USB MP3 n’est pas un
standard qui signifie qu’une marque
différente ou que différents modèles
ont leurs propres standards. Notre
produit ne peut donc pas supporter
tous les lecteurs MP3.
Lorsque vous reliez un lecteur MP3
et qu’il y a une pile normale dans le
lecteur (pas une pile rechargeable),
vous devez retirez la pile du lecteur
MP3 puis connecter l’interface USB.
Sinon, la pile risque d’exploser.
Lorsque vous êtes en mode USB,
assurez-vous de ne pas retirer le
pilote USB de l’interface USB.
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marquant MCR-1302 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marquant MCR-1302 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 2,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info