487659
24
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
24
OPERATION
RADIO OPERATION
Switching to radio mode
Press MODE button on remote control
to select radio mode or tap the Radio
icon on the SOURCE menu on the
screen.
In radio mode, the following information
will appear on the display.
Selecting the frequency band
Press BAND on remote control or tap
BAND bar on the screen to select
desired band. The reception band will
change in the following order:
Selecting station
During radio mode, shortly press
button on the front panel or on the
remote control or tap
icon on
the screen to increase frequency, shortly
press button on the front panel or on
the remote control or tap
icon
on the screen to decrease frequency
by one step of channel spacing. Hold
the button longer for fast tuning. The
frequency is updated correspondingly
on display.
Press and hold
/ buttons on the
front panel, “Manual” will appear on the
screen display, you can adjust the
frequency manually. If there is no
operation for about 5 seconds, “Manual”
will disappear. The system will exit this
mode.
Setting memory
Press RADIO PRESET buttons (1~6)
on remote control or press
/ on the
front panel or on the remote control to
preset stations at radio mode. With this
system, a total of 24 stations (for two
wave band) or 30 stations (for three
wave band) can be stored in the
memory of six buttons.
Each band stores up to six preset
stations.
The stations might be FM1, FM2, FM3,
MW band. The operation is as below:
- Store in Memory Press and hold
desired memory location button for
several seconds. The current listening
station will be stored into the number
button.
- Or tap “CH” character on the screen
then press and hold M1~6 button
bars on the screen will stored the
current station to the location button.
- Retrieve a Preset Station
Press any one of the RADIO PRESET
buttons (1~6) on remote control to
retrieve a station which had been
stored in the memory in advance the
chosen number is shown on display.
Automatic Memory Story & Program
Scanning
- Program scanning
Shortly press AS/PS button on remote
control or on the front panel shortly
tap AS/PS bar on screen to scan
preset station. And it will hold at each
station for about 5 seconds.
- Automatic memory storing
Press and hold AS/PS button on
remote control or AS/PS bar on the
screen for about several seconds or
press AS/PS button on the front panel,
the radio searches from the current
frequency and checks the signal
strength until one cycle search is
finished. And then stations are stored
into the preset number button in turn
according to the strength of the
stations.
When auto search is finished, it will
enter into preset scan mode
automatically.
Note: In FM mode press and hold 1-
6 numeric buttons on the front panel
or on the remote control fro about 2
seconds, will store the current station
to the current numeric key position.
Mono/Stereo
Press MO/ST button on remote control
to select mono or stereo mode. You
can sometimes improve reception of
distant stations by selecting mono
operation.
Local/Distant
Press and LOC button on the remote
control to select between local and
distant stations.
FM1 FM2 FM3 MW
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marquant MCR-1302 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marquant MCR-1302 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 2,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info