292906
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Plus, you can remotely activate the camera of your choice with the included X-10 controllable
power supply (XM11). Enjoy the convenience of controlling all your cameras with only one receiver!
Operating instructions for Remote Controlled Power Supply, Model XM11
The XM11 is used to power and control the XCAM2 wireless camera. Think of the XM11 as an
X10 Module that has a 12V output (to power the XCAM2 Camera)
The XM11 lets you have multiple XCAM2 cameras which all transmit to the same Video Receiver.
You are now able to activate the camera of your choice.
The Marmitek X10 system is used to control the XM11. To do this you need the following
components with your XM11: - 1x Marmitek Transceiver (TM13 or Marmitek Security console)
- 1x Marmitek RF Remote (HR10, 8in1, KR22…)
Installation:
1. Set the House Code dial (A..P) to match the setting on the Transceiver and Remote
2. Set the Unit Code dial (1..16) to a different code for all XM11 units (e.g. 1, 2, 3 and 4)
3. S
et the channel of the XCAM2 camera’s and Video Receiver to the same code (A..D, e.g. all to B)
4.
Plug the XM11and the Transceiver into the mains outlet. You are now able to control the XM11 units
with your remote (the signal is sent from the Transceiver to the XM11 via the existing mains wires)
Use: When you switch on the camera of your choice, the presently active camera will be
automatically switched off.
GROUP FUNCTION OF THE MARMITEK X-10
CONTROLLABLE POWER SUPPLY.
The XM11 power supplies allows the use of multiple camera’s with one single XCAM2 Receiver.
Whenever you select a camera by your remote control, the camera of your choice will be switched
on while the other active camera’s will be switched off.
This switch-off function works in 4 groups of 4:
Group 1 Group 2 Group 3 Group 4
Camera 1 5 9 13
Camera 2 6 10 14
Camera 3 7 11 15
Camera 4 8 12 16
Application examples:
1. When you’ve set one camera to address A1 and a second one to A2, camera 1 will be switched
off as soon as you activate camera 2. Camera 1 or 2 will switch off as soon as address A3 or A4
is activated. This setting within one group is a useful feature when you’ve applied camera’s only
within the code group A1 through A4.
5XCAM2
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek xcam2 wireless colour camera bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek xcam2 wireless colour camera in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info