613361
5
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
ENGLISH
5MegaView60/61
5. Connect the power adapter [5] to the ‘DC/5Vconnection on the MegaView60/61 receiver
(HDMI Receiver) and plug the adapter into a socket.
INSTALLATION IR (INFRARED) RETURN (MEGAVIEW61 ONLY)
1. Position the MegaView61 transmitter at an accessible location behind or next to your
HDMI devices and close to a wall socket. Please take into account the cable length of the
IR LEDs and make sure that the connections remain accessible.
2. Plug the required IR Extender cable (with the 2 IR LEDs) [6] into the MegaView61
transmitter.
Self-adhesive foil has been supplied with the IR LEDs. This allows you to attach the IR
LEDs to the IR sensor of your A/V device.
Test the position and operation of the IR LEDs before sticking them definitively to the IR
sensor of your A/V device.
In case you want to operate another device besides your A/V device (of which you are
transmitting the signal), you may use the second IR LED for this.
If you are only using one of the two IR LEDs, please leave the second IR LED unused.
Never remove it from the extender cable!
3. Now connect the IR Receiver [7] to the MegaView61 receiver.
Position the supplied IR receiver in sight of your infrared remote control and as little as
possible in the proximity of potential sources of interference such as direct sunlight,
strip light, energy saving bulbs, etc. By using the supplied self-adhesive strip, placement
is possible almost everywhere. Please experiment with the right positioning before
definite attachment of the IR receiver.
Attention! The adhesive strip may cause discolouration on certain surfaces or leave
behind traces of glue.
4. Connect the power adapter [5] to the “POWER” socket of the MegaView61 receiver and
plug the adapter into a wall socket.
5. USAGE
1. Switch on the HDMI source (e.g. HD set-top box or multi media PC).
2. Switch on the display device (for instance HDTV or projector) and select the appropriate
input. Usually you will do this by pressing the A/V or EXT button of your remote control.
3. You will receive images from the connected A/V device immediately.
4. With the MegaView61 you may now also operate the connected device from this room
using your own remote control, by pointing it at the IR receiver.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek MegaView 61 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek MegaView 61 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info