613364
5
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
5
Megaview50 & 51
ENGLISH
3. Connect the MegaView50/51 receiver (Audio/Video Receiver) to your display device
[2] (for instance TV or projector) using a cinch cable (not included).
Please make sure that the colours of the plugs correspond to the input sockets. That
means red to red, white to white and yellow to yellow.
4. Use a CAT5 Ethernet cable (not included) to connect the MegaView50/51 transmitter
and receiver to each other [3].
INSTALLATION IR (INFRARED) RETURN (MEGAVIEW51 only)
1. Position the MegaView51 transmitter at an accessible location behind or next to
your A/V devices and close to a wall socket. Please take into account the cable
length of the IR LEDs and make sure that the connections remain accessible.
2. Plug the required IR Extender cable (with the 2 IR LEDs) [4] into the MegaView51
transmitter.
Self-adhesive foil has been supplied with the IR LEDs. This allows you to attach the
IR LEDs to the IR sensor of your A/V device.
• Test the position and operation of the IR LEDs before sticking them definitively to
the IR sensor of your A/V device.
In case you want to operate another device besides your A/V device (of which you
are transmitting the signal), you may use the second IR LED for this.
If you are only using one of the two IR LEDs, please leave the second IR LED
unused. Never remove it from the extender cable!
3. Now connect the IR Receiver [5] to the MegaView51 receiver.
Position the supplied IR receiver in sight of your infrared remote control and as
little as possible in the proximity of potential sources of interference such as direct
sunlight, strip light, energy saving bulbs, etc. The infrared indicator LED in the IR
receiver will light up or blink when it receives infrared communication. Use this
indicator LED to position the IR receiver at the most interference-free location
(indicator LED will not or hardly light up when it does not receive a signal).
By using the supplied self-adhesive strip, placement is possible almost everywhere.
Please experiment with the right positioning before definite attachment of the IR
receiver.
Attention! The adhesive strip may cause discolouration on certain surfaces or
leave behind traces of glue.
4. Connect the power adapter [6] to the “POWER” socket of the MegaView51 receiver
and plug the adapter into a wall socket.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek MegaView 51 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek MegaView 51 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info