494334
5
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
25
The junction box or distribution
box fitted with a Marmitek X-10
module must be covered with a
switching device or cover plate.
It must not be used without a
cover plate, see Figure 2.
Never cover Marmitek X-10
modules with insulation material
because this can restrict heat
dissipation.
The connecting wires of
Marmitek X-10 modules with
interface functionality are
potential-free. If the connecting
wires come into contact with
live components, this can lead to
irreparable damage to the
module. To prevent unconnected
wires from coming into contact
with live parts, these wires must
be insulated with insulating tape
or terminals.
PROG.
N
L
DAX
10
!
N
L
DAX
10
prog.
SAIX
Figure 2.
26
Instructions for installation & connection of modules
The Marmitek X-10 module may not be installed too close to
a heat source (such as a lamp, built-in spotlight or radiator).
The ambient temperature at the module may not be greater
than 35 °C.
Never use any instruments or force when installing the
Marmitek X-10 modules. The Marmitek X-10 modules contain
fragile electronics that can become defective or cause
malfunctioning as a result of an excessive mechanical load.
We recommend that the Marmitek X-10 modules be installed
against the rear wall of the junction box and that the
installation wiring be placed around the Marmitek X-10
module. If there are junctions in the junction box, you are
advised to place them in front of the Marmitek X-10 module.
PROG.
N
L
SAIX
P
!
27
When tightening the screws
of the Marmitek X-10
modules, the tightening
torque may not exceed 0.5
Nm. If the torque is higher,
the terminals may break off. If
one of the terminals breaks
off, the Marmitek X-10 module
may no longer be used.
Marmitek X-10 modules must
remain accessible at all times for
programming and maintenance
or service.
PROG.
N
L
DAX
10
M = max. 0.5 Nm
Max. torque for screw terminals
P
PROG.
N
L
DAIX
10
Industry standards
When applicable, the Marmitek X-10 modules and devices are compliant with the industry
standards written in directive 2002/95/EC (RoHS) and directive 2002/96/EC (WEEE directive
).
Copyrights
Marmitek is a trademark of Pattitude B.V., All rights reserved. Copyright and all other
proprietary rights in the content (including but not limited to model numbers, software,
audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content,
but without limitation, distribution, reproduction, modification, display or transmission
without the prior written consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions.
20321 - 2010623
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek AFX3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek AFX3 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info