6592
46
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
42
ENGLISH
Erasing the all functions
1.
Press and hold down the T.MODE and MEMO buttons until
LEARN is displayed in the display.
2.
Press and hold down the CL button and press POWER ON and
POWER OFF button.
A-CLR and LEARN are blinking.
3.
Press OK button to continue erasing.
A-CLR is displayed for 3 seconds and the mode returns to
LEARN mode.
To cancel the erasing operation, do not press OK button and
simply touch any other button.
4.
To return the USE mode, press and hold down the OK button
until USE is displayed in the display.
Note:
Erasing codes will return to the factory preset code, or there will
leave empty if the button has no factory preset code.
MACRO MODE
PROGRAMMING MACROS
Macros make it possible to use a single function button to perform
more complex series of operations that would normally require
pressing several buttons. A single button can be programmed to
perform up to 10 steps in sequence. A typical example of such a series
might be as follows:
Turn the main amplifier power ON Switch the function to DVD
Set the Surround Mode to Virtual Set the DVD player to PLAY.
No signals may be transmitted during macro programming.
The various steps that make up a macro are set initially to be sent
one after another in 1 second intervals, however these intervals
may be shortened to as little as 0.5 seconds or lengthened to as
much as 5 seconds using the Setup mode.
In the macro mode, the number of steps the macro is displayed the
following selected function name.
Macros may be programmed for each of the 12 function buttons as
follows;
TV, DVD, VCR1, DSS, TUNER, CD, CDR, MD, TAPE, AUX1,
AUX2, AMP
1.
Press and hold the T.MODE and MENU button until the MACRO
is displayed.
MACRO and LEARN indicators are displayed blinking on the
LCD, too.
2.
Press the Function button for which you wish to program a series
of operations.
In this case, lets use the example of the DVD player.
Press the DVD Function button. The LCD will display DVD-M.
Characters displayed on LCD include the following, depending on
the function button for which the macro is being programmed:
TV-M, DVD-M, VCR-M, DSS-M, TUN-M, CD-M, CDR-M, MD-M,
TAP-M, AX1-M, AX2-M, AMP-M
If a macro has already been set for the selected function
button, the LCD will blink.
3.
Press the buttons for the operations you wish to program as a
macro in the sequence you want the macro to program them.
For example, press DVD, PLAY.
The number of steps in the macro is displayed on LCD and
this number increases by 1 with each button pressed.
Each function button can be programmed to perform up to 10
steps in sequence.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR-7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR-7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info