37771
17
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
13
ENGLISH
CHANGING THE TEXT BRIGHTNESS ON
THE LCD (LCD CONTRAST ADJUSTMENT)
Changing procedure (Changes can be made from
the main unit when operation is stopped.)
q If playback is in progress, press the
STOP
button to stop playback.
w Hold down the
PAUSE
button on the main unit
for at least two seconds. (This operation does not
work on the remote control.)
After holding down the button for two seconds,
the current contrast value is displayed. Within two
seconds while it is displayed, press the
button to increase the contrast, or press the
button to reduce the contrast. Changes
can be made to the contrast level over the entire
range (+8 to -8).
If the or button is not pressed
within two seconds, the contrast is automatically
set to the currently displayed level.
Display example: Contrast +-0
e Pressing the
STOP
button while changing the
setting returns to the default setting (+-0).
* Any changes made to the LCD contrast setting
are retained even when the power is turned off.
TURNING OFF THE DISPLAY AND
ILLUMINATION (DISPLAY OPERATION)
This function is used to turn the LCD and illumination
lamps (blue) on and off. (Two display statuses are
available.)
1. Mode where LCD and illumination lamp (blue) turn
on
Each time the
DISPLAY
button is pressed during
playback, the LCD and illumination lamp (blue)
switch on and off.
When Display Off is set, the Display Off indicator
(red) lights up.
* When any related button is pressed (such as
when the
OPEN/CLOSE
button,
STOP
button, or button is used), the display is
automatically turned on, but the Display Off
indicator (red) remains lit. If a track is started in
this state, the display is automatically turned off
two seconds later.
* When a track is stopped, the Display Off
indicator (red) and illumination lamp (blue) light
up alternately.
2. Setting for turning on only LCD (illumination lamp
(blue) remains off)
In the default state, the illumination lamp (blue) is
lit. In this state, the illumination lamp (blue)
remains off regardless of whether the LCD is
turned on or off.
Changing procedure (Changes can be made
when operation is stopped.)
q If playback is in progress, press the
STOP
button to stop playback. To make the setting, hold
down the
DISPLAY
button for at least two
seconds from the remote control (RC-11SAS1).
w If the illumination lamp (blue) is lit, it is turned off
and is set off. To change the setting from off to
on, hold down the same operation
DISPLAY
button for at least two seconds to turn on.
* The illumination lamp (blue) off setting is retained
even when the power is turned off, and this setting
remains until the setting is changed to the on
setting.
* The LCD display on/off setting is not retained when
the power is turned off. (This enables you to enjoy
operation each time you use it.)
TIMER PLAY
This unit can perform timer play by cooperating with
your audio timer.
Connect this units power cord to the audio timers
power socket and the timers power cord to power
outlet.
* For connection to audio timer and its operation,
please refer to the instruction manual of your audio
timer.
Setting method of Timer Play
q Press POWER switch to turn ON the power.
w Insert the disc to be played.
* In timer play mode, tracks are played normally.
e Set the audio timer.
Audio Timer
ABOUT BALANCED JACKS
q The balanced output connector uses a XLR
connector.
w The XLR connector for professional use is
internally wired in either of the following two
systems.
1. USA system (Pin w = COLD, Pin e = HOT)
wq
e
GND
HOT
COLD
2.
European system (Pin w = HOT, Pin e = COLD)
wq
e
GND
COLD
HOT
e The SA-11S1 uses the 1. USA system.
When a preamp or main amplifier adopting the
European system is connected using a cable with
XLR balanced connectors, the reproduced signal
may be inverted of phase.
In this case, correct the wiring of the one of the
XLR connectors on the extremities of the cable
to the USA system by exchanging the connections
of pins w and e. This will make it possible to
play the signal with the correct phase.
SA-11S1N(ENG) 04.8.3, 4:42 AMPage 13 Adobe PageMaker 6.5J/PPC
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SA11S1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SA11S1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info