61654
35
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
33
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
IF YOU EXPERIENCE
PROBLEMS
ENGLISH
IF YOU EXPERIENCE PROBLEMS
RADIO OPERATIONS
Symptom Possible Cause Resolution
Cannot select a broadcast station
by preset number.
The unit has lost all preset
information.
Register the broadcast station
again.
There is a lot of noise when
listening to an FM broadcast.
The signal of the broadcast station
being tuned is weak or reception is
poor in your area.
1. Change the orientation of the
antenna.
2. Try setting the FM stereo to FM
mono. (Page 22)
3. Change the FM antenna to a
commercially available outdoor
antenna.
Cannot automatically select FM
broadcast stations.
The signal of the broadcast station
being tuned is weak or reception is
poor in your area.
1. Change the orientation of the
simple antenna.
2. Try setting the FM stereo to FM
mono. (Page 22)
3. Change the FM antenna to a
commercially available outdoor
antenna.
Cannot automatically select AM
broadcast stations.
The AM loop antenna is not
connected correctly.
Connect the loop antenna correctly.
The signal of the AM broadcast
station is weak.
Refer to how to manually register a
broadcast station. (Page 21)
Display says “Station not available”.
Ensure that DAB coverage exists in
your area.
Check that antenna is connected.
I can not access Secondary
services.
At the time of publishing this
manual not many Secondary
services are available, this will
increase as more DAB stations start
broadcasting.
If a Secondary service station
is available, the SECONDARY
indicator will be displayed next to
the station name.
I hear a burbling sound on some
stations.
DAB like other digital media is good
at producing quality audio from a
low level signal, however if this
signal, level is too low a “burbling”
sound can sometimes be heard.
Use the unit’s “Tuning aid” while
repositioning your antenna to get
the maximum signal strength and
reduce this noise.
OPERATING EXTERNAL EQUIPMENT
Symptom Possible Cause Resolution
Audio from the external inputs
(AUX1 to AUX3) is not emitted.
The connections to external devices
are incorrect.
Refer to connecting external
devices. (Page 9)
The external device is not in play
mode.
Be sure to play media according to
the manual for the external device.
The input source is incorrect. Check the input source.
The audio volume of the external
device is low.
Increase the audio volume of the
external device.
The headphone jack has been
mistaken for the AUX1 jack.
Check the connector being used for
the connection.
Noise is being emitted from an
external device.
The cable being used to connect to
external is not connected securely.
Check cable connections.
M-CR502_T_DAB_01_ENG.indd 33M-CR502_T_DAB_01_ENG.indd 33 09.2.4 1:35:43 PM09.2.4 1:35:43 PM
35

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Marantz-M-CR502

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz M-CR502 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz M-CR502 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info