66734
42
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
ENGLISH
40
TROUBLESHOOTING
Incorrect operation is often mistaken for trouble or malfunction.If you think that there is something wrong with this component,check
the points below.Sometimes the trouble may lie in another component.Inspect the other components and electrical appliances being
used.If the trouble cannot be rectified after checking the items below,ask your nearest MARANTZ authorized service center or your
dealer to carry out repair work.
No picture / No color
Incorrect video connections.
Check that connections are correct and that plugs are
inserted fully.
TV/monitor or AV amplifier settings are incorrect.
Check the instruction manual of the connected equipment.
The VIDEO-Progressive menu is set to ON but your TV/
monitor is not compatible with progressive scan.
Reconnect the player to your TV using a composite or S-
Video cord and set the TV to appropriate input. Now
choose the OFF setting in the VIDEO-progressive menu,
then swith the TV input back to the component input.
Or Push stop button for longer than 5 sec to set progressive
scan setting into OFF.
Screen is stretched or aspect does not change.
The TV ASPECT setting in the Setup menu is incorrect.
Set the TV ASPECT option to match the TV/monitor you’re
using (pages 33 ).
Picture disturbance during playback or dark.
This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal,and
when this type of disc is played back,stripes etc.,may appear
on some sections of the picture depending on the TV.
This is not a malfunction.
Discs respond differently to particular player functions.This
may result in the screen becoming black for a brief instant or
shaking slightly when the function is executed.
These problems are largely due to differences between discs
and disc content and are not malfunctions of this player.
The TV type may be set in appropriately. See setting the
TV type on page 34.
When using progressive scan. If your TV is connected
using COMPONENT VIDEO OUT Jack, set the
PROGRESSIVE menu to OFF (page 34).
When recorded on a VCR or passed through an AV
selector, there is disturbance in the playback picture.
Due to the player ’s copy protection circuits,connection of
this device through a VCR or an AV selector may prevent
recording or cause picture problems.
This is not a malfunction.
The remote control doesn’t seem to work.
The Control In jack on the rear panel is connected.
Check that REMOTE CONTROL SW is set to the external
position (page 9 ).
The remote control is too far from the player,or the angle
with the remote sensor is too wide.
Use the remote within its operating range (page 3 ).
The batteries are exhausted.
Put in new batteries (page 3 ).
Check that REMOTE CODE setting is set to the correct
position (page 15 ).
The disc is ejected automatically after loading.
Dirty or damaged disc.
See pages 37 for disc care information.
Disc not seated properly in the disc guide.
Align the disc properly.
Incompatible region number.
If the region number on a DVD-Video disc does not match
the number on the player,the disc cannot be used (page 4 ).
Condensation inside the player.
Allow time for condensation to evaporate.Avoid using the
player near an air-conditioning unit.
Playback is not possible.
Disc is loaded upside down.
Reload the disc with the label side face up.
A Super VDC is does not comform with the IEC.
standard might not play normally.
mark appears on screen.
The operation is prohibited by the player and / or disc.
Picture playback stops and the operation buttons cannot be used.
Press ,then start playback again ( ).
Switch the power off once using the front panel POWER
button and then switch on again using the front panel
POWER button.
New settings made in the Setup screen menus while a
disc is playing are ineffective.
Some settings can be changed while a disc is playing, but
are not effective until the disc is stopped then restarted.
This is not a malfunction.
Make the same setting when the player is stopped.
Settings are canceled.
When the power is cut due to power failure or by
unplugging the power cord,settings will be canceled.
Before unplugging the power cord,press POWER button
and checking that STANDBY indicator light on the front
panel.
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz DV4300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz DV4300 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info