37777
25
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
21
ENGLISH
7
Confirm and change timer
program
You can check and change the timer program
setting as follows.
1. Press the TIMER button x.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select timer
program number.
3. You can change the displayed contents with the
Easy JOG 4/¢ knob !5 or 5 or button
c and ENTER buttons b if necessary.
Note
Timer program is not changed if you quit
confirming halfway through a procedure.
7
Timer program off
1. Press the TIMER button x, TIMER
PROGRAM 1 is displayed.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select timer
program number.
3. Press the Easy JOG 4 /¢ knob !5 or
ENTER button b, TIMER PROGRAM x SET
is displayed.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select TIMER
PROGRAM x OFF.
5. Press the Easy JOG 4 /¢ knob !5 or
ENTER button b to turn off the timer program.
Note
To turn a timer program back on again, repeat
this procedure and select TIMER PROGRAM x
ON.
7
Sleep timer
The sleep timer function allows the unit to be in
standby mode automatically after specific period
of time.
1. Press the SLEEP button ⁄7 on the remote
control.
2. Each press of the button will increase the time
before shut down in the following sequence.
3. The sleep timer will be shown for 5 seconds in
the display, and it will count down until the time
has elapsed. When the programed sleep timer
has elapsed, the unit will automatically turn off.
Note that the display will be dimmed when the
sleep timer is programed.
4. Press the SLEEP button ⁄7. The display shows
the remaining time until standby mode begins.
5. To cancel the sleep timer, press the SLEEP
button ⁄7 repeatedly until the display shows
SLEEP OFF.
When the sleep timer is programed, DIMMER
function does not activate.
10
20
30 60 90 120OFF
LAST FUNCTION MEMORY
This unit is equipped with a last function memory
which stores the input and output setting
conditions as they were immediately before the
power is switched off.
This function eliminates the need to perform
complicated resettings when the power is turned
on.
The unit is also equipped with a back-up
memory.
This function provides approximately one week
of memory storage when the main units power
switch is off and with the mains cord
disconnected.
INITIALIZATION OF THE
MICROPROCESSOR
When the indication of the display is not normal
or when the operation of the unit does not shows
the reasonable result, the initialization of the
microprocessor is required by the following
procedure.
1. Unplug the mains cord from the power outlet
after pressing the POWER ON/STANDBY
switch q or button z and setting the
standby mode.
2. Holding both the MENU button u and POWER
ON/STANDBY switch q, plug the mains cord
into the power outlet.
3. Check that the entire display is flashing with an
interval of about 1 second, and release your
fingers from the 2 buttons and the
microprocessor will be initialized.
Notes
If step 3 does not work,start over from step 1.
If the microprocessor has been initialized all the
button settings are reset to the default values
(the values set upon shipment from the factory).
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
q
!5 u
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
⁄7
x
z
n
b
c
OTHER OPERATION
CR401N_01 Eng 05.11.18 4:55 PM ページ21
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz CR401 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz CR401 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info