742654
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Use of the radio code keypad
To protect the radio code keypad keep the cover
closed when it is not in use.
S
witch on the keypad light:
• Press the LIGHT button.
The keypad light is on for 5 sec.
O
pen and close the garage door:
• Enter the programmed 4-digit PIN and then press
the ENTER button. The garage door starts to
move.
• After having pressed the ENTER button, the radio
code keypad remains active for approx. 18 sec.
and the LED is on. During this period of time you
can stop the garage door by pressing any button
(except the LIGHT button).
• Under certain conditions it may be necessary to
keep one button pressed so that your garage door
control works. In this case enter the 4-digit PIN
and then hold the ENTER button. The garage door
moves as long as the ENTER button is held.
Advice:
In case a PIN longer than 4 digits is entered,
only the last 4 digits are considered as
valid. If three wrong PIN's are entered in
sequence, the radio code keypad cuts off to
prevent unauthorised access. After 2 min.
the radio code keypad is ready for use
again.
Light function (to switch other devices):
• To actuate another device (e.g. switch on the yard
light), press the LIGHT button and then the enter
button.
• To switch off the other device (e.g. the yard light),
press the LIGHT button again and then the ENTER
button.
Change the PIN
• Hold "button 0" for approx. 3 sec. until the LED
flashes quickly.
• Enter the PIN to be changed and then press the
ENTER button.
• Enter the new 4-digit PIN and then press the
ENTER button. The LED is on for 2 sec. (no
flashing).
• The radio code keypad is now ready for operation
with the new PIN (the old PIN is no longer valid).
Clear memory
• Press the LIGHT button.
-> After 3 sec. the LED starts to flash quickly.
• Hold the LIGHT button.
• While holding the button, enter PIN 9-9-9-9.
• Release the LIGHT button.
-> The memory is now cleared.
The LED is on for 2 sec.
Advice:
After clearing the memory the radio code
keypad is programmed with 1 random
code and PIN 1-2-3-4.
Replace batteries
• Take a coin to turn the lock on the bottom side of
the wall bracket anti-clockwise. Then take the
radio code keypad out of the wall bracket.
• Unscrew the back cover of the housing of the
radio code keypad.
• Take out the old batteries.
• Insert 2 new 3V batteries, CR 2032. Observe right
poling. Test the function of the unit (The radio
code keypad is designed that it will recognize all
previously programmed codes and PIN's after
change of battery).
• Screw again the back cover of the housing to the
radio code keypad.
A
dvice:
Don't dispose of old batteries in the
dustbin! Return them to your dealer or
dispose of in a recycling container for used
batteries.
Technical details
Frequency: 868,3 MHz (max. 0.36 mW)
433,92 MHz (max. 0.13 mW)
Voltage: 2 batteries 3V, CR 2032
Current input: approx. 11 mA
Size: 70 x 100 x 30 mm (B x H x T)
Weight: approx. 120 g
Protection category: IP 54
Range of temperature: -20°C to 60°C
Designated use
The radio code keypad is to be used to control door
operator and to switch on and off electrical devices
(power-operated units).
The Declaration of Conformity can be looked up at
the manufacturer mentioned in supply documents.
Simplified EU declaration of
conformity
Hereby, Marantec Antriebs- und Steuerungs technik
GmbH & Co. KG declares that the radio equipment
type Command 231 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet
address:
www.marantec.com
Version: 09.2017
#70794
1 - GB 360232 - M - 0.5 - 0404
Gehäuseunterschale
2Batterien3V,CR2032
2 batteries 3V, CR 2032
Back cover of housing
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantec Command 231 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantec Command 231 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Marantec Command 231

Marantec Command 231 Gebruiksaanwijzing - Français - 2 pagina's

Marantec Command 231 Gebruiksaanwijzing - Français - 2 pagina's

Marantec Command 231 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info