636202
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
EN
Circuit Card ZM-SKS B / Rev.A 1.3 – 5
5.4 Overview of DIP switch functions
DIP switch Setting Function Connection
DIP 1 ON - Evaluation for 8.2 KOhm closing edge safety device
- Evaluation for pneumatic closing edge safety devices,
in connection with an 8.2 KOhm resistance
Terminal block X3,
Terminals 7 + 8
OFF Evaluation for OPTO closing edge safety device. Terminal block X3,
Terminals 7 + 8 + 9
DIP 2 ON - Pressure switch testing is switched on.
- Pressure switch testing is carried out with the door at the CLOSED end positi-
on. For this, the pressure switch contact must be broken for a moment as the
door touches the ground.
-
OFF - Pressure switch testing is not switched on.
- The pressure switch is not tested at the CLOSED end position.
-
DIP 3 ON - Automatic closing timer is switched on.
- From the OPEN end position, the door closes automatically after the program-
med door-open duration expires.
Basic functions when automatic closing timer is switched on
- If the photocell barrier is interrupted during closing, the door stops and then
opens again. The door open duration starts anew.
- If the photocell barrier is interrupted during the door open duration, the door
open duration starts anew.
- If the closing edge safety system is activated during closing, the door stops
and then opens again. The door open duration starts anew.
If the closing edge safety device is activated three times during one cycle, the
door does not close automatically again.
-
OFF - Automatic closing timer is switched off. -
DIP 4 ON - Yard light function is switched on when the OPEN command is given.
- With the yard light setting, the light then stays on for 2 minutes. Via DIP
switch 5 it can be set to delay, which means that the drive does not start until
the light has been on for 3 seconds.
Potential-free
switching contact K3,
terminal block X9,
terminals 1 + 2 for connecting
an external light source.
OFF - Red trafc light function is switched on.
- 2 options are available using DIP 5.
Potential-free
switching contact K3,
terminal block X9,
terminals 1 + 2 for connecting a
red trafc light.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantec AS 210 B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantec AS 210 B in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Marantec AS 210 B

Marantec AS 210 B Aanvulling / aanpassing - Nederlands - 8 pagina's

Marantec AS 210 B Gebruiksaanwijzing - Nederlands - 12 pagina's

Marantec AS 210 B Aanvulling / aanpassing - Deutsch - 8 pagina's

Marantec AS 210 B Gebruiksaanwijzing - Deutsch - 12 pagina's

Marantec AS 210 B Gebruiksaanwijzing - English - 12 pagina's

Marantec AS 210 B Aanvulling / aanpassing - Français - 8 pagina's

Marantec AS 210 B Gebruiksaanwijzing - Français - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info