599023
5
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
5
recommend to take a 10 to 20-minute rest every hour.
When you leave the equipment, even if it is a short time, always
switch off the engine or remove the battery cartridge. The
equipment unattended with the engine running may be used by
unauthorized person and cause serious accident.
Follow the instruction manual of the power unit for proper use of
the control lever and switch.
During or after operation, do not put the hot equipment onto dry
grass or combustible materials.
If blades catch weeds or the like, switch off the motor and remove
the spark plug cap or battery cartridge, and then remove the
obstructions.
Keep your hands and feet clear of the blades. Contacting
blades can result in serious injury. When handling the
blades, stop the motor and remove the spark plug cap or
battery cartridge.
Do not touch the gear case. The gear case becomes hot during
operation.
Transport
Before transporting the equipment, switch off the motor and
remove the spark plug cap or battery cartridge.
When transporting the equipment, carry it in a horizontal position
by holding the shaft. Keep the hot mufer away from your body.
When transporting the equipment in a vehicle, properly secure
it to avoid turnover. Otherwise fuel spillage and damage to the
equipment and other baggage may result.
Maintenance
Before doing any maintenance or repair work or cleaning the
equipment, always switch off the motor and remove the spark
plug cap or battery cartridge. Wait until the motor gets cold.
To reduce the risk of re, never service the equipment in the
vicinity of re.
Always wear protective gloves when handling the blades.
Always clean dust and dirt off the equipment. Never use gasoline,
benzine, thinner, alcohol or the like for the purpose. Discoloration,
deformation or cracks of the plastic components may result.
After each use, tighten all screws and nuts, except for the
carburetor adjustment screws.
Never repair bent or broken blades by straightening or welding.
It may cause parts of the blades to come off and result in serious
injury. Contact Makita authorized service center for Makita
genuine blades to replace them.
Do not attempt any maintenance or repair not described in this
booklet or the instruction manual of the power unit. Ask Makita
authorized service center for such work.
Always use Makita genuine spare parts and accessories only.
Using parts or accessories supplied by a third party may result
in the equipment breakdown, property damage and/or serious
injury.
Request Makita authorized service center to inspect and maintain
the equipment at regular interval.
Storage
Before storing the equipment, perform full cleaning and
maintenance. Remove the spark plug cap or the battery cartridge.
Drain the fuel after the engine gets cold.
Store the equipment in a dry and high or locked location out of
reach of children.
Do not prop the equipment against something, such as a wall.
Otherwise it may fall suddenly and cause an injury.
First aid
Always have a rst-aid kit close by. Immediately replace
any item taken from the rst aid kit.
When asking for help, give the following information:
Place of the accident -
What happened -
Number of injured persons -
Nature of the injury -
Your name -
Assembly and adjustment
WARNING:
Before assembling or adjusting the cultivator, make sure that the
motor is switched off and remove the spark plug cap or battery
cartridge. Otherwise blades or other parts may rotate and result
in serious injury.
Before handling or working around blades, wear protective
gloves. Otherwise the blades can cut bare hands.
When assembling or adjusting the equipment, always put it down.
Assembling or adjusting the equipment in an upright position may
result in serious injury.
Follow the warnings and precautions in the chapter “Safety
precautions” and the instruction manual of the power unit.
Mounting the attachment to a power unit (Fig. 5)
To mount the attachment to a power unit, follow the steps below.
1. Make sure that the lock lever (A) is not tightened.
2. Align the pin (B) with the arrow mark (C).
3. Insert the shaft into the drive shaft of the power unit until the
release button (D) pops up.
4. Tighten the lock lever (A) rmly as shown.
To remove the attachment, loosen the lock lever, press the lock
button and withdraw the shaft.
NOTICE: Do not tighten the lock lever (A) without the shaft of the
attachment inserted. Otherwise the lock lever may tighten the
entrance of the drive shaft too much and damage it.
Operation
WARNING:
If the blades rotate at idle, adjust the idle speed of the engine
down. Otherwise you cannot stop the blades with throttle off and
it may cause serious injury.
Follow the warnings and precautions in the chapter “Safety
precautions” and the instruction manual of the power unit.
Basic operation
Press the blades into the soil and move them forward, backward
or sideward. For example, to loosen packed soil, move the blades
forward and backward alternatively.
Breaking up soil
First, remove weeds, old roots, stones and other hard objects.
Hold the equipment rmly. Till a small area to the desired depth rst
and then move to the next area. Be careful not to leave footprints.
Mixing soil improver
First, remove weeds, old roots, stones and other hard objects.
Spread soil improver, such as compost, leaves, fertilizers or the like
evenly.
Apply the blades of the cultivator to mix the soil improver into soil.
Inspection and maintenance
WARNING:
Before inspecting or maintaining the equipment, switch off the
motor and remove the spark plug cap or the battery cartridge.
Otherwise blades or other parts may move and result in serious
injury.
Before handling or working around blades, wear protective
gloves. Your ngers may contact with blades and it may cause
serious injury.
When inspecting or maintaining the equipment, always put it
down. Assembling or adjusting the equipment in an upright
position may result in serious injury.
Follow the warnings and precautions in the chapter “Safety
precautions” and the instruction manual of the power unit.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita KR400MP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita KR400MP in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info