599955
2
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
2
en
3
en
To help you get the best possible performance
from your new Magnetic Drilling Machine, this
guide contains simple, sensible pointers for
the safe, effective and long term use of the
equipment.
Please read it carefully BEFORE using the
drill.
Ensure that you have observed all the general
and specific safety procedures.
BEFORE YOu StaRt
If you are unfamiliar with the use of annular
(or broaching) cutters, take a few minutes to
read this guide - you will benefit from the better
performance and longer life of the tool if you
understand the concept.
Annular cutters only cut material at the
periphery of the hole, rather than converting
the entire hole to shavings. As a result the time
and energy required to make the hole is lower
than for a traditional twist drill.
The broaching capacity of a machine is
therefore greater than the twist drill capacity.
The slug ejected after the cut also has a higher
scrap value than shavings.
the Broach cuttinG
concePt
POWER
REQUIRED
CUTTING TIME
CUTTING TIME
MATERIAL
REMOVED
hB500 sPeciFications
Cutter capacity - 12 – 50mm
Chuck Capacity - 5/8” (with adapter)
‘No load’ speed - 350/650 rpm
Power consumption - 1150w
Clamping force
- 9300N (950kg)
L x H x W (mm) - 290 x 450 x150
Weight - 18.5 kg
Voltage - 110/230v
Includes: Warranty, Carrying case, Hex Wrenches,
Safety strap & guard, Cutting Oil
RECYCLING
In observance of European
Dire c tive 2002/96/E C o n
waste electrical and electronic
equipment and its implementation
in accordance with national
law, electric equipment that
has reached the end of its life must be collected
separately and returned to an environmentally
compatible recycling facility.
WEEE Compliance Certificate:- on request
All magnetic drilling systems are fully compliant
with ROHS regulations.
Due to our continuing programme of research and
development, these specifications are subject to change
without notice.
cOntEntS
Explanation of the pictograms on the
specification plate of the Makita HB500
DANGER!
Indicates an imminent danger or risk to
life and health of a general nature.
ELECTRICAL DANGER!
This means a direct pending danger or
risk to life due to electricity.
CAUTION!
Indicates a possible danger or risk of
slight injury or damage to property.
WEAR EYE & EAR PROTECTORS
USE SAFETY STRAP!
to attach the tool to the workpiece.
EC Declaration of Conformity
We the Makita Corporation as the responsible
manufacturer declare that the following Makita
machine:
Designation of Tool: Magnetic Drilling Machine
Model No./ Type: HB500
conforms to the following European Directives:
2006/42/EC, 2004/108/EC
and has been designed in compliance with:
EN 55014-1:2006,
EN 55014-2:1997 + A2:2008,
EN 61029-1:2009, EN 61029-2-6:2010,
EN 61000-3-2 & EN 61000-3-3, and with the essential
Health & Safety requirements.
And is manufactured in accordance with the following
standards or standardised documents:
EN60745.
Makita International Europe Ltd,
Michigan Drive, Tongwell,
Milton Keynes,
MK15 8JD,
England
30th July 2011
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
3. The Broach Cutting Concept
4. Safety & Maintenance
6. Material and Cutting speeds
7. Feeds and Speeds
8.
Fitting Safety Guard & Strap and Oil Bottle
9. Fitting Cutters
10. Starting the Cut
11. Stopping the machine
12. Motor diagram & parts list
14. Stand diagram & parts list
17.
Fr Instructions françaises
30.
de Deutsch Anweisungen
44.
ne Nederland instructies
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita HB500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita HB500 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info