448381
5
Verklein
Vergroot
Pagina terug
1/149
Pagina verder
5
Method of operation
Use the brush cutter only in good light and visibility. During cold
seasons beware of slippery or wet areas, ice and snow (risk
of slipping). Always ensure a safe footing.
Do not overreach. Keep proper footing, balance and hand
control of the unit at all times.
Never cut above waist level.
Never stand on a ladder while running the brush cutter.
never climb up into trees to perform any cutting operation with
the brush cutter.
Never work on unstable surfaces or steep terrain.
Remove all objects such as stones, nails, broken glass, wire,
etc. found within the working ares.
Foreign articles may damage the cutting tool, can cause
dangerous kickbacks, or could be thrown about dangerously.
Before commencing cutting the cutting tool must have reached
full working speed.
Never operate this tool while it is turned upside-down or when
it is at an extreme angle.
!WARNING! — The cutter area is still dangerous while the
machine is coasting to a stop.
Kickback
When operating the brush cutter, uncontrolled kickback can
occur.
This particularly is the case when attempting to cut within a
blade segment between 12 and 2 oclock as viewed from the
operators position.
Never touch this segment of the brush cutter to solid objects,
such as bushes, stumps, trees, etc., with a diameter greater
than 3 cm.
The brush cutter will then be deflected at great force and speed
with the potential risk of serious injuries.
Never operate the brush cutter using the blade seg-
ment between the 12 and 2 o’clock position.
Kickback prevention
To avoid kickbacks, observe the following:
Operation within the blade segment between 12 and 2 oclock
can cause serious potential hazards, especially when using
metal cutting blades.
Use of this brush cutter utilizing blade segment positions from
11 to 12 oclock and 2 to 5 oclock can still cause a likely
potential for some kickback.
Cutting operations attempted within the blade segments
between 11 and 12 oclock, and between 2 and 5 oclock,
should only be performed by trained and experienced opera-
tors, and only at their own risk. Smooth and easy cutting with
almost no kickback is possible using the blade segment be-
tween 8 and 11 oclock.
Cutting Tools
Use only the correct cutting tool for the specific job in hand.
Cutter blade (Star Blade (4 teeth), Eddy Blade (8 teeth)):
For cutting thick materials, such as weeds, high grass, bushes,
shrubs, underwood, thicket, etc. (max. 2 cm dia. thickness).
Perform this cutting work by swinging the brush cutter evenly in
half-circles from right to left (similar to using a scythe).
Maintenance instructions
The condition of the cutter, in particular of the cutter blade,
guard and of the shoulder strap must be checked before
commencing work. Particular attention is to be paid to the
cutting blades which must be correctly sharpened.
Turn off the engine and remove spark plug connectors when
replacing or sharpening cutting blade, and also when cleaning
the cutter or cutting tool.
Caution: Kickback
Diagrammatic figure
Diagrammatic figure
12
2
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita EBH341R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita EBH341R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 3,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info