599865
5
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
5
Method of operation
Use the blower only in good light and visibility. Beware of slippery or wet
areas, ice and snow (risk of slipping) , and narrow space.
Always ensure a safe footing.
Never work on unstable surfaces or steep terrain.
Do not work from ladders or high places. Otherwise it may result in
personal injury.
To reduce the risk of personal injury, do not direct air blast towards
bystanders, since the high pressure of the air flow could injure eyes and
could blow small objects at great speed.
Never insert any foreign object into the air intake of the machine or into
the nozzle of the blower. It will damage the fan wheel and may cause
serious injury to the operator or bystanders as a result of the object or
broken parts being thrown out at high speed.
Pay attention to the direction of the wind, i.e., do not work against the
wind.
To reduce the risk of stumbling and loss of control, do not walk backward
while operating the machine.
Always shut off the engine before cleaning or servicing the unit or
replacing parts.
Take a rest to prevent loss of control caused by fatigue. We recommend
to take a 10 to 20-minute rest every hour.
Do not operate the machine near the windows, etc.
To reduce damage from vibration and/or damage to the ears, operate the
machine at low speed if possible and limit the time of operation.
Operate the machine only at reasonable hours. Do not operate the blower
in the morning or late at night when people might be disturbed.
It is recommended for using rakes and brooms to loosen debris before
blowing.
Before blowing, slightly dampen surfaces in dusty conditions or use
water mist sprayer if necessary.
Adjust the length of the blower nozzle so that the stream can work close
to the ground.
To reduce sound levels, limit the number of pieces of equipment used at
any one time.
After using blowers and other equipment, CLEAN UP! Dispose of debris in
trash receptacles.
Maintenance instructions
Be kind to the environment. Operate the blower with as little noise and
pollution as possible. In particular, check the correct adjustment of the
carburetor.
Clean the blower at regular intervals and check that all screws and nuts
are securely tightened.
Never service or store the blower in the vicinity of open flames, sparks,
etc. (11).
Always store the blower in a well-ventilated locked room and with an
emptied fuel tank.
Observe and follow all relevant accident prevention instructions issued by
the trade associations and by insurance companies. Do not perform any
modifications to the blower as this will risk your safety.
The performance of maintenance or repair work by the user is limited to
those activities as described in this instruction manual. All other work is to
be done by Authorized Service Agents.
Use only genuine spare parts and accessories supplied by Makita.
Use of non-approved accessories and tools means increased risk of
accidents and injuries. Makita will not accept any liability for accidents
or damage caused by the use of any non-approved attachment or
accessories.
Never make modification on the equipment. It may cause dangerous
accidents or personal injury.
(10)
(11)
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita EB7650TH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita EB7650TH in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens als bijlage per email.

De handleiding is 6,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info