690911
4
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
4
Fuels/Refuelling
Stop the engine before refuelling the chain saw.
Do not smoke or work near open res.
Let the engine cool down before refuelling.
Fuels can contain substances similar to solvents. Eyes and skin should not
come in contact with mineral oil products. Always wear protective gloves when
refuelling. Frequently clean and change protective clothes. Do not breathe in fuel
vapors. Inhalation of fuel vapors can be hazardous to your health.
Do not spill fuel or chain oil. When you have spilt fuel or oil immediately clean
the chain saw. Fuel should not come in contact with clothes. If your clothes have
come in contact with fuel, change them at once.
Ensure that no fuel or chain oil oozes into the soil (environmental protection). Use
an appropriate base.
Refuelling is not allowed in closed rooms. Fuel vapors will accumulate near the
oor (explosion hazard).
Ensure to rmly tighten the screw plugs of the fuel and oil tanks.
Change the place before starting the engine (at least 3 m from the place of
refuelling).
Fuel cannot be stored for an unlimited period of time. Buy only as much as will be
consumed in the near future.
Use only approved and marked containers for the transport and storage of fuel
and chain oil. Ensure children have no access to fuel or chain oil.
Putting into operation
Do not work on your own. Another person must be nearby in case of
emergencies (within shouting distance).
Ensure that there are no children or other people within the working area. Pay
attention to any animals in the working area, as well.
Before starting work the chain saw must be checked for perfect function
and operating safety according to the prescriptions. Never use a chain
saw with defects. Check especially the function of the chain brake, the correct
mounting of the guide bar, the correct sharpening and tightening of the chain,
the rm mounting of the chain cover, the easy motion of the throttle trigger and
the function of the throttle trigger lock-out, the cleanliness and dryness of the
handles, and the function of the combination switch.
When you drop the chain saw or it gets other impacts, stop using the tool
immediately and perform inspection for identify signicant damage or defects.
Put the chain saw only into operation if it is completely assembled. Never use the
chain saw when it is not completely assembled.
Check your personal protective equipment.
Put the chain saw into operation only as described in this instruction manual.
Other starting methods are not allowed.
Before starting the chain saw ensure that you have a safe footing.
When starting the chain saw it must be well supported and securely held. The
guide bar and chain must not be in contact with any object.
Check chain oil reaches sufciently to the chain.
3 Meter
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita EA3601F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita EA3601F in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 12,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info