494093
7
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
CONTROLS AND INDICATORS
1 • FRONT/SUB INPUT CONNECTORS: Connect the pre-output leads of the head unit to the
input connectors of the amplifier. This input will drive the end section of both the FRONT
section and the SUB one.
2 • REAR INPUT CONNECTORS: Connect the pre-output leads of the head unit to the input
connectors of the amplifier. This input will drive the end section of the REAR section.
3 • 4CH/2CH INPUT MODE SELECTOR:It allows to select the amplifier’s input configuration
as follows:
a) “4ch” - the operation of the five channels depends upon the connection
of the four input channels
b) “2ch” - utilize the FRONT/SUB inputs to drive the five channels by
means of two inputs only.
4 • FRONT CROSSOVER SELECTOR: Il allows to select the FRONT amplifiers operation
mode:
a) “FLAT”: the FRONT amplifier reproduces the whole audio range on
grounds of the signal present at its input;
b) “63 Hz”: the High-Pass crossover is activated at 63 Hz to determine the
starting value of the high frequencies present at FRONT outputs;
c) “80 Hz”: the High-Pass crossover is activated at 80 Hz to determine
the starting value of the high frequencies present at FRONT outputs.
5 • FRONT INPUT GAIN ADJUSTMENT CONTROL: It allows to adjust input sensitivity to the
FRONT section from 200 mV to 4 V.
6 • REAR CROSSOVER SELECTOR: It allows to select the REAR amplifier’s operation
mode:
a) “FLAT”: the REAR amplifier reproduces the whole audio range on
grounds of the signal present at its input;
b) “63 Hz”: the High-Pass crossover is activated at 63 Hz to determine the
starting value of the high frequencies present at REAR outputs;
c) “80 Hz”: the High-Pass crossover is activated at 80 Hz to determine
the starting value of the high frequencies present at REAR outputs.
7 • REAR INPUT GAIN ADJUSTMENT CONTROL: It allows to adjust input sensitivity to the
REAR section from 200 mV to 4 V.
8 • SUB CROSSOVER SELECTOR: It allows to select the crossover frequency of the SUB
amplifier:
a) “50 Hz”: the Low-Pass crossover is activated at 50 Hz to determine the
end point of the low frequencies present at SUB output;
b) “80 Hz”: the Low-Pass crossover is activated at 80 Hz to determine the
end point of the low frequencies present at SUB output;
c) “120 Hz”: the Low-Pass crossover is activated at 120 Hz to determine
the end point of the low frequencies present at SUB output.
9 • SUB INPUT GAIN ADJUSTMENT CONTROL:
It allows to adjust input sensitivity to the Sub section from 200 mV to 4 V.
7
2 Ch 4Ch
Mode
Flat 63 80Hz
50 80 120Hz
O/M 45.40 (5T) 25/06/02 19:25 Page 7
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Macrom 45.40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Macrom 45.40 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info