737640
11
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
11
PROBLEM SOLUTION
When the barbell
is lifted out of its
cradle an extra
weight plate lifts
out and becomes
dislodged from the
remaining weight
plate stack.
TIP: Be sure to lift the barbell vertically when removing it from the cradle. If
the barbell is pulled out at an angle, it may drag against un-selected weight
plates.
The cradle end plate is too tight. Loosen the four bolts beneath the cradle at
one end. The four holes are slotted for the purpose of adjusting the cradle
length. With the cradle end loose, place the fully loaded barbell in and out of
the cradle several times. It will self-adjust to the proper setting. To test, select
50 lbs and lift the barbell out quickly and see if the rest of the plates remain
in place without “sticking”.
Check the surfaces between weight plates to make sure they are clean and
free of debris*.
The weight plates should slide together easily with little resistance. Also check
the tabs on the weight plates to ensure they are not bent or broken from
accidental misuse. If so, replace any damaged weight plates.
The weight selector
dial feels too tight
and does not turn
smoothly.
Check to ensure you have released the weight selector dial fully by pressing
the release button. If not fully released the locking mechanism could be
hindering the dial from turning.
Adjust cradle end plate as described above.
Check to see if stand is on a firm, level surface.
Shuffle the weight plates around.
The barbell rack
seems to be loose
Tighten the bolts. If bolts have cross threaded or stripped, please contact
your dealer for replacements.
MAINTENANCE & TROUBLESHOOTING GUIDE
To ensure maximum lifespan and optimal performance follow these steps:
1. Keep your MX80 system in a dry, clean climate controlled environment at room temperature.
2. Periodically clean your weight plates and the barbell with disinfectant, applied using a lint free cloth.
3. Keep dust off the system.
4. ARMOR ALL protectant will give your system a beautiful clean and shine.
5. Periodically examine your product for damage, if repairs are required refer to the MX Select website
for information on how to service your system and purchase spare parts. Only manufacturer supplied
components can be used to maintain and repair the equipment under warranty.
6. Periodically shuffle the weight plates.
7. Store and operate your MX80 system on level ground.
8. Periodically check that the bolts on the system are tight.
For full product support, manuals and warranty requests visit: www.MXSelect.com/support
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MX Select MX80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MX Select MX80 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info