507839
23
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
English User manual
20
Exchanging the headlight
bulbs
Open the engine bonnet.
On the bulb unit (a), remove the
cable (b).
Turn the bulb unit to the left by a
quarter of a revolution and
remove from the reflector (c).
Exchange the bulb with a bulb of
the same wattage.
Replace the bulb unit into the
reflector and secure it (by turning
a quarter of a revolution to the
right).
Mount the cable on the bulb unit.
Close the engine bonnet. Check
that it is fully engaged.
Exchanging the tail light bulbs
Turn the bulb mounting anti-
clockwise until the tounges on the
mounting oppose the notches in
the tail light reflector.
After bringing into line, carefully
pull the mounting out of the tail
light reflector.
Remove the bulb from the
mounting and replace it with
a new one.
Bring the tounges on the
mounting into line with the
notches in the reflector and
carefully push the mounting into
place. Tightly turn the mounting in
a clockwise direction.
Exchanging the indicator
bulbs
Loosen the screws on the lens
and remove the lens.
In order to remove the bulb from
the lamp mounting, press the
bulb in a little and turn it anti-
clockwise.
Align the new bulb on the
mounting slot, press the bulb into
the mounting and screw it into the
mounting in a clockwise direction.
Secure the lens again using the
screws.
Exchanging the fuses
The tractor’s electric system is
protected from high current damage
with fuses. Always replace fuses
with those of the same amperage.
If the electric system does not work,
check for fuses which have been
tripped.
If the electrical system regularly trips,
take it to a specialist workshop.
Fuses in the cable trunk
The fuses in the tractor cable (3)
trunk protect the entire electrical
system of the tractor.
A defective fuse is exchanged as
follows:
Open the bonnet and remove the
right side covering
In front of the cross-sheet,
localise the fuse holder (1) directly
on the right hand side, on the
inner side of the instrument
holder.
Remove the fuse (2) from the
holder and replace it with one of
the same amperage. NEVER
replace it with one of a higher
amperage.
Attach the side covering and
reclose the bonnet.
Tyre pressure
t~êåáåÖ
kÉîÉê=ÉñÅÉÉÇ=íÜÉ=ã~ñáãìã=
éÉêãáííÉÇ=íóêÉ=éêÉëëìêÉ=EëÉÉ=ëáÇÉ=çÑ=
íóêÉFK=tÜÉå=éìãéáåÖ=ìé=íÜÉ=íóêÉëI=
Çç=åçí=ëíÇ=áå=Ñêçåí=çê=~ÄçîÉ=íÜÉãK
The recommended tyre operating
pressure is:
For tyre equipment suitable for
lawns:
Over-inflating reduces the longevity
of the tyres. Tyre pressure should be
checked before every journey.
Notes concerning wheel
change
t~êåáåÖ
låäó=ìëÉ=~ééêçîÉÇ=îÉÜáÅäÉ=à~ÅâëK=
Work safely. Only tighten the screws
/ nuts crosswise using a torque key.
The starting torque for the screws /
nuts:
Front wheels 74 Nm
Rear wheels 108 Nm
a
b
c
1
2
3
Dimension
Tyre
pressure
front 23 x 9.5 – 12 0,7 bar
(0,8 max.)
rear 31 x 12 – 15 1.0 bar
(1.3 max.)
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MTD CubCadet serie 6000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MTD CubCadet serie 6000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van MTD CubCadet serie 6000

MTD CubCadet serie 6000 Gebruiksaanwijzing - Nederlands - 26 pagina's

MTD CubCadet serie 6000 Gebruiksaanwijzing - Deutsch - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info