672419
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Operating manual English
9
Oil and petrol
Oil
Use quality oil only, API
classification TC (TSC-3) which
is offered for air-cooled two-stroke
engines.
Mix the oil for two-stroke engines
according to the instructions
on the container, 1:40 (2,5 %).
Petrol
Danger
Under certain conditions petrol
is extremely flammable and
explosive.
Refuel only in a well ventilated
area and with the engine swit-
ched off. Do not smoke and
switch off all ignition sources
in the vicinity of the tank
or at the fuel storage depot.
Do not overfill the fuel tank (there
must be no fuel in the inlet
nozzle). After filling up the tank,
ensure that the tank cap
is closed and secured.
When filling up the tank,
do not spill any fuel.
Spilled fuel or petrol vapours may
ignite. If fuel has been spilled,
ensure that the area is dried
before the engine is restarted.
Prevent repeated or prolonged
skin contact or inhalation
of the vapours.
Caution
Do not fill up with fuel of speci-
fication E85. If fuel of specification
E85 (ethanol content >15 %) is
used, the engine may be damaged.
The use of an unauthorised fuel will
void the warranty.
See instructions on mixing
oil and petrol
Old and/or incorrectly mixed fuel
are the main reasons for the unit
not running properly.
Always use clean, fresh unleaded
petrol (no more than 30 days old,
minimum octane number 91 ROZ).
Follow exactly the instructions
for the correct petrol/oil mixture.
Correctly mix two-stroke engine oil
and lead-free petrol, 1:40 (2,5 %).
Do not mix directly in the tank.
Filling the tank
Fig. 1
Remove tank cap (4).
Fill fuel tank with petrol/oil
mixture. Never overfill!
Close fuel tank tightly.
Move the unit approx. 10 m from
the filling station/fuel container
before starting the engine.
Operating
Danger
Do not hook the shoulder strap onto
the unit until the engine has started.
Mix petrol (gasoline) with oil.
Fill the tank with the mixture.
See “Oil and petrol”.
Starting the engine
Starting with a cold engine.
Fig. 9
Press throttle lock (2) and press
the throttle (3) all the way and
hold in position.
Note
The throttle cannot be actuated until
the throttle lock has been pressed.
Move the ignition switch (1)
to the
I/
START
position.
Press the switch (4) down.
Release throttle lock and throttle.
Note
Both levers remain locked in the
depressed position (cold start
position).
Slowly and fully press intake
pump/primer (1) 6x (Fig. 10).
The fuel must be visible in the
pump. If this is not the case, keep
pressing until fuel is visible.
Move choke lever (2) to position
(Fig. 10).
Press the unit on the ground.
Slowly pull on the starter cable
until it begins to resist.
Then pull quickly and forcefully
until the engine starts (Fig. 11).
After starting the engine, do not
let the pull-starter spring back,
but slowly guide it back.
Leave the engine running
for approx. 1–2 minutes.
Move choke lever (2) to position
(Fig. 10).
Press throttle (3) and then
release to deactivate the cold
start lock (Fig. 9). The switch (4)
jumps automatically back to the
original position. The engine runs
at idling speed.
Note
The unit has warmed up adequa-
tely when the engine accelerates
without faltering.
Starting with a warm engine
Move the ignition switch (1)
to the I/START position (Fig. 9).
Move choke lever (2) to position
(Fig. 10).
Press the unit on the ground.
Slowly pull on the starter cable
until it begins to resist.
Then pull quickly and forcefully
until the engine starts (Fig. 11).
After starting the engine, do not
let the pull-starter spring back,
but slowly guide it back.
Note
If the engine does not start, move
the choke lever (2) to position .
When the engine has started,
move the choke lever (2) back
to position (Fig. 10).
Stopping the engine
Fig. 9
Release throttle (3).
Leave the idling engine to cool
down.
Move the ignition switch (1)
to the 0/STOP position.
Note
If the engine does not stop when
the ignition switch is actuated,
move the choke lever (2) to position
to force the engine to stop
(Fig. 10). Before using the unit
again, have the ignition switch
checked by a specialist workshop!
!
!
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MTD BC26 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MTD BC26 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van MTD BC26

MTD BC26 Gebruiksaanwijzing - Nederlands - 17 pagina's

MTD BC26 Gebruiksaanwijzing - Deutsch - 18 pagina's

MTD BC26 Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info