568571
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
ENGLISH  |      VDV800
7
VDV-800 OUTDOOR UNIT FOR THE
VISTADOOR VIDEO INTERCOM SYSTEM
INTRODUCTION
Thank you for choosing the VISTADOOR video intercom system. You
have purchased a high quality system with a stainless steel cover.
The elaborate stainless steel covers are made by hand and thus have
individual characteristics that should be considered a sign of quality.
NOTES ON CARING FOR STAINLESS STEEL
Please never clean the stainless steel surfaces with standard cleaning
materials, as these are too harsh. Please simply clean using spray desi-
gned for the cleaning and care of stainless steel. If this is not available
please use only clear water.
Brushed surfaces should always be cleaned with the grain and never in
a circular motion. This will avoid the creation of scratches.
Failure to observe these notes may lead to discolouration or even to
corrosion damage in extreme cases.
The system should be assembled by a specialist.
KEY
1 Outdoor unit
1.1 Wall box
1.2 Stainless steel front plate
2 Indicator field
3 Camera
4 Loudspeaker perforations
5 Bell button
6 Microphone
7 Casing screws
8 Lightness sensor
9 Volume potentiometer
10 Dip switch for the opening time of the door opener
11 Dip switch for the ID code
12 Connection terminal door opener
13 Connection terminal power supply
14 Connection terminal signal line
15 Connection terminal external camera
16 Installation aid
SCOPE OF DELIVERY
1x Outdoor unit
1x Wall box
1x Plaster aid
7x Torx screw for front plate (1pc. spare)
3x Installation aid incl. screw
8x Dowel and screw
PREPARATION FOR INSTALLATION
The following lines are required:
Single-family house: 4 lines from the outdoor unit to the indoor unit
and 2 lines from the outdoor unit to the door opener.
Multi-family house (from VDV-820): In this case 4 lines are required per
bell button from the outdoor unit into each residential unit.
Example VDV-840: 16 lines are required at the outdoor unit for the
residential units (4 lines each x 4 bell buttons) and 2 lines to the door
opener.
Up to four indoor units can be connected in parallel per residential unit.
The connection can either be laid from the indoor station or in a star
formation from a central point (distribution box).
The lines should be laid in such a way that they are fed out of the wall
directly behind the relevant outdoor/indoor unit.
Note: It is also possible to combine video and audio
components with the VISTADOOR system.
INSTALLATION OF THE OUTDOOR UNIT
The intercom system is designed to be flush-mounted.
Preparation
When removing the front cover, take care that the indicator field and
the nameplate do not fall out and get damaged.
The camera should be mounted at a height of approx. 1.5-1.6m
(middle of the camera) (Fig. 3). Before installing the intercom system,
test whether the camera captures a sufficient image of the visitor. If
necessary, adjust the installation height and location to suit the local
conditions.
1. Remove the six screws from the stainless steel front plate using
a Torx screwdriver (T10) and then lift it upwards. Now you can
uncover the wall box by carefully removing the rubber seal and
taking out the actual outside station.
2. Hold the wall box straight on the wall and draw around it on the
wall with a suitable pencil. Take care that the necessary connecting
cables are in the middle part of the wall box. The cables should not
be measured too short.
3. The cable feedthrough can be detached with a sharp knife.
Note:
The hole for the intercom system should be measured so that the wall
box fits precisely inside and is flush with the building wall.
4. In order to anchor the wall box to the wall, first use the holes in
the base of the wall box to mark the 8 fixing holes in the wall and
then drill corresponding holes (diameter approx. 6 mm).
5. Next place the supplied dowels in the holes. The wall box can now
be affixed with the 4 outer screws. Take care here to ensure that
the wall box is level; check this if necessary with a spirit level. The
wall box must also not be twisted.
NOTE: If the wall box is affixed only insecurely by the screws, the
wooden frame can be filled along the sides with appropriate glue.
6. For plastering insert the supplied plaster aid into the wall box. This
prevents the wall box from being filled with mortar / plaster. When
plastering make sure that the threaded inserts will not be soiled
with mortar / plaster.
7. Insert the outer unit into the wall box. In order to prevent the outer
VDV-800_I-Manual_Fin2.indd 7 26.10.12 12:17
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ME VDV 810 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ME VDV 810 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info