694355
44
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
INSTALLATION AND USE MANUAL
Chapter 7
page 44
Maintenance and cleaning
Technical service MCZ S.p.A. all rights reserved - Reproduction prohibited
Never clean the refractory material with a damp cloth
or anything else, as it may be stained.
Use a dry paintbrush if necessary to remove heavy
soot build-up.
If the Alutec does not whiten, it is not to be
considered as a defect in light of the warnings and
instructions above.
7.1.4. Lubrication and routine maintenance of the
extensible guides
All of the doors of the fireplace stoves are mounted on extensible
ballbearing guides that ensure a robust, sturdy system that provides
silent movement.
Prolonged use and the heat of the fireplace stove gradually depletes the
lubricant in the guides. This will cause them to become less efficient
and noisier.
If necessary, periodically grease both runners as follows:
Pull open the frame liner and extract the door so you can see
the tracks of the guide.
Using the provided grease gun, apply two drops of grease,
about 5 mm in diameter, at the highest visible point of the
runners. Do not exceed the recommended amount!
Perform this operation on both guides. Keep in mind that the
total amount of grease to be used is about 0.5ml (see
graduated scale on grease gun).
After lubrication:
Put the glue gun back and conserve it
Lower and raise the door completely at least 6 or 7 times so
that the grease is spread onto all of the other components of
the guides to complete lubrication. You should notice a
substantial improvement in ease of movement and noise
reduction.
It is advisable to carry out this operation at the end of
the season of use, or whenever the runners become
too noisy.
Do not use other types of grease. If the grease gun
runs out, request an MCZ original replacement.
7.1.5. Maintenance of kit VF (if installed)
The maintenance of all electrical parts (fan, control
unit, etc.) must only be carried out with no electrical
power supplied and with the unit unplugged.
7.1.5.1.
Electric fan
Periodically, and at least at the end of each winter, it is advisable to
clean the fan blades, which may have suctioned up dust or other small
foreign bodies due to the static pressure exercised by the fan along the
air ducts.
Clean the fan blades only with compressed air or with a vacuum
cleaner. Take care not to damage the rotor or the fan blades.
Figure 15 Points to be greased with provided
grease gun
Downloaded from www.Manualslib.com manuals search engine
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MCZ Forma Wood bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MCZ Forma Wood in de taal/talen: Engels als bijlage per email.

De handleiding is 5,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info