58
Descriptions and illustrations in this booklet are
given as simply indicative. The manufacturer
reserves the right, considering the characteristics
of the models described here, at any time and
without notice, to make eventual necessary
modifications for their construction or for
commercial needs.
A
Fig. 5.1
F
Fig. 5.2
REPAIRS
REPLACING THE POWER SUPPLY
CABLE
Turn the cooktop over and unhook the
terminal board cover by inserting a
screwdriver into the two hooks “A” (fig.
5.1).
Open the cable gland by unscrewing
screw “F” (fig. 5.2), unscrew the terminal
screws and remove the cable.
The new supply cable, of suitable type
and section, is connected to the terminal
board following the diagram in fig. 5.3.
FEEDER CABLE SECTION
The external diameter of the supply
cable must not be more than 9 mm.
type “H05RR-F”
230 V~ 3 x 1,50 mm
2