824910
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
10
4. SETUP
4.1 Baby unit
Menu  ow goes as follows for the baby unit once you push the menu button:
Channel & Sub-code > VOX Sensitivity > Auto Monitor > Exit menu
On the Baby unit, the following settings can be adjusted:
Send channel: this is the frequency at which the baby unit transmits. You can
choose from channel 1 ~ channel 8.
Sub code: this option adds an extra code to the signal allowing you to only listen
to your baby unit without interference from other transmitters on the same fre-
quency.
VOX: This allows you to determine how loud the baby must cry before the baby
units starts transmitting to the parent unit. At VOX setting 1 the baby must cry
loudly before the sound is transmitted to the parent unit. At VOX setting 4 also
(very) soft baby sounds are transmitted. It will require some experimenting to  nd
your ideal VOX level.
Auto monitor: see chapter 5.3 of this manual for the description of this function.
1. Insert the Baby unit into wall socket.
2. Brie y press the button and use the or button to set the send channel.
3. Brie y press the button and use the or button to set the send sub code.
4. Brie y press the button and use the or button to set the send the VOX
sensitivity.
5. Brie y press the button and use the or button to enable or disable the
Auto Monitor’ function.
6. Brie y press the button to save your settings and to  nish the setup.
Note: When the nightlight of the baby unit is switched on, you CANNOT change the set-
tings. First press the
When the nightlight of the baby unit is switched on, you CANNOT change the set-
or
When the nightlight of the baby unit is switched on, you CANNOT change the set-
button to switch o the nightlight. The setup menu will auto-
matically disappear from the screen if you do not press a button for a while.
4.2 Additional Baby Unit #2 or #3
Use a diff erent channel for each Baby unit when using 2 or 3 baby units. The other set-
tings can be freely adjusted.
4.3 Parent Unit
You set up the parent unit as follows:
1. Brie y press the ON/OFF key (10) button to enter the settings menu, 1 appears
in the display (this means baby unit 1). Use the
Brie y press the ON/OFF key (10) button to enter the settings menu,
or
Brie y press the ON/OFF key (10) button to enter the settings menu,
button to indicate whether
baby unit 1 is present.
2. Brie y press the menu button (11) and choose to turn it ON or OFF by using the
or
Brie y press the menu button (11) and choose to turn it ON or OFF by using the
button and then press menu brie y in order to set the same send channel
as you have set for baby unit 1 by also using the
button and then press menu brie y in order to set the same send channel
or
button and then press menu brie y in order to set the same send channel
button.
3. Brie y press menu button (11) and use the
as you have set for baby unit 1 by also using the
or button to set the same sub
code as you have set for baby unit 1.
4. Brie y press menu button (11) to indicate whether baby unit 2 is present.
5. Brie y press the menu button (11) and choose to turn it ON or OFF by using the
or
Brie y press the menu button (11) and choose to turn it ON or OFF by using the
button and then press menu shortly in order to set the same send channel as
you have set for baby unit 2 by also using the
button and then press menu shortly in order to set the same send channel as
or
button and then press menu shortly in order to set the same send channel as
button.
6. Brie y press menu button (11) and use the
you have set for baby unit 2 by also using the
or button to set the same sub
code as you have set for baby unit 2.
7. Brie y press menu button (11) again to indicate whether baby unit 3 is present.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Luvion Icon Long Range bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Luvion Icon Long Range in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info