599463
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
38 mm (1.50")
90 mm (3.54")
38 mm (1.50")
14 Threads per inch
85 mm (3.35")
132.5 mm (5.22")
123 mm (4.84")
Dimensions
Connection
120
120
+
12 VDC
B C
D
E
F
G
H I
A
D
J
1.22 m (4 ft)
Specications
General
Receiver Type L1, C/A code, 1.575 GHz Frequency/L2 C/A
code, 1.602 GHz Frequency
Channels 32 channels
Position Update Rate Up to 10 Hz (1,5,10)
Horizontal Accuracy 3 m (9.8 ft)
Heading Accuracy +/- 3°
Rate of Turn +/- 3°
Pitch / Roll Accuracy @30 degrees 1 grade error
Cold Start 50 sec
Start-Up Time 3 sec
Satellite Reacquisition 5 sec
Environmental
Operating Temperature -25° C to +60° C
Storage Temperature -40° C to +85° C
Splash Proof IPX7
Humidity 40° C, 93%RH, operating
Electrical
Input Voltage 9 V DC - 18 V DC
Reverse Polarity Protection Yes
Power Consumption < than 2w
Current Consumption < 100 mA @ 12 V DC
Dimensions 90 mm (diam) x 38mm (height)
3.54” (diam) x 1.50” (height)
Weight 0.14 Kg (0.3 lbs) aprox
Power/Data Cable NMEA 2000 thru NMEA 2000 network
Antenna Connector NMEA 2000 Micro C
Mounting Flush mount / Standard Pole Mount
Communications
Data I/O Protocol NMEA 2000
NMEA 2000 PGNs
PGN Number PGN Title
126992 System Time
129025 Position, Rapid Update
129026 COG & SOG RU
129029 Position Data
129539 GNS DOP
129540 GNS Satellites in view
127258 Magnetic Variation
127250 Compass Heading (Vessel Heading)
127251 Rate of Turn
127257 Attitude
Compliance Statements
Lowrance Point-1, Simrad GS25 and B&G ZG100
Meet the technical standards in accordance with Part 15.103 of the FCC Rules.
Comply with CE under R&TTE directive 1999/5/EC
Comply with the requirements of level 2 devices of the Radio-communications (Elec-
tromagnetic Compatibility) standard 2008.
The relevant Declaration of Conformity is available in the following website under
model documentation section:
http://www.lowrance.com/
http://www.simrad-yachting.com
http://www.bandg.com
A Chart Plotter
B Lowrance Point -1 or Baja has molded cable 1.2 m (4 ft)
C Simrad GS25 or B&G ZG100 : Requires NMEA 2000 Drop Cable (D)
D NMEA 2000 drop cable max length 4.55 m (15 ft)
E 120 Ohm Terminator (Male)
F 120 Ohm Terminator (Female)
G Fuse (5 Amp)
H Switch
I NMEA 2000 Power cable 1.8 m (6 ft)
J 12 VDC Power supply
60 mm
Lowrance LGC-5000
Cable can side exit
Requres 0 mm of surface thickness
B&G ZG100
Simrad GS-25
Heading sensor calibration
The built in heading sensor will need to be calibrated before use
to compensate for local magnetic fields on your vessel for accurate
chart with radar overlay.
Auto Calibrate mode
Before the heading sensor calibration is started, make sure that
there is enough open water around for the vessel to make multiple
full turns. The calibration should be done in calm sea conditions
and with minimal wind to obtain best results.
A Disconnect then re-connect the sensors NMEA 2000 cable.
B Make two consecutive turns of 360 degrees. The completion
of these two turns automatically activates the Auto Calibration
procedure.
C Continue with a smooth third turn and a quarter (of at least 390
degrees) within 2 to 5 minutes, to complete the calibration.
D Calibration should be complete. If the time is outside the limits,
the calibration is void and the radar overlay may not appear
accurate on your chart. Repeat steps A-D again.
A
B
C D
Calibration from a Multifunction Display
Calibration can be performed from a compatible Multifunction
Display, instrument display or autopilot controller. (Please refer to
the operator/installation manual).
Multiple heading sensors on the network
WARNING:
If there are two Point-1 units (or an additional heading sensor) on
the network, the Point-1 antenna(s) will stop sending heading
information.
This does not apply to Simrad GS25 and B&G ZG100.
Heading sensor application
This sensor includes an electronic heading sensor to provide chart
stabilization, course over ground at low speeds, and overlay of radar
on charts.
Acceptable performance for the application
A rate stabilized heading sensor such as RC42N
will provide the most robust performance for
demanding applications.
Point-1
GS25
ZG100
RC42N Rate compass
MARPA
Radar Overlay
MARPA
Radar Overlay
MARPA
Radar Overlay
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lowrance GPS Antenna bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lowrance GPS Antenna in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info