593858
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
* The cities marked with “*” use daylight saving
time (summer time).
GMT = Greenwich Mean Time
TIME DIFFERENCES
Note: The time differences and use of daylight
saving time may change in some areas
or countries when they are so decided
by the countries concerned.
HOW TO USE THE MEMO FUNCTION
A 3-channel memo function is provided to
register a memo in each channel for display.
Up to 40 characters can be entered for
each memo.
Memo channel No.
To enter the memo
1. Press button “A” to show the MEMO mode.
2. Press button “C” to select the desired memo
channel in the following order.
CH-3CH-2
CH-1
3. Press button “A” for 2 to 3 seconds to
show the memo entry display. The flashing
cursor appears at the left end of the upper
row.
4. Press button “C” or “D” to select the character
to be entered. Characters move quickly
by keeping the respective buttons pressed.
5. Press button “B” to enter the desired characters.
6. Repeat the steps “4” and “5” above until
the desired memo is entered.
7. Press button “A” to return to the MEMO
mode.
Notes:
1. If the watch is left untouched in the memo
entry display with the cursor flashing, it
will automatically return to the MEMO mode
in 2 minutes.
2. To protect the registered memos from damage
or loss in case of accident, malfunction,
repair, loss or theft of the watch, be sure
to keep data sources such as business cards
or note down the memos in a note book or
the like.
Please note that we are not liable for any
damage or lost profits resulting from the
use of this watch and the loss or change of
the registered data caused by malfunction
or repair of the watch. We will not accept
any claim for recovery of such damage or
lost profits made by any third party.
HOW TO SET THE ALARM
Minutes
Hour
Hourly time
signal mark
Alarm
mark
1. Press button “A” to show the ALARM mode.
2. Press button “A” for 2 seconds to show the
alarm setting display. The hour digits
(and PM mark if the time is set in the 12-
hour indication) start flashing.
3. Press button “B” to select the digits to be
adjusted (flashing).
MinutesHour
4. Press button “C” or “D” to set the digits.
One digit is increased or decreased with
each press of button “C” or “D”, respectively.
The digits move quickly by keeping the
respective buttons pressed.
* Pressing button “C” will increase the digits
while pressing button “D” will decrease
them.
5. After all the adjustments are completed,
press button “A” to return to the ALARM
mode.
GMT ± (hours)
Abbreviation displayed
Name of city or area
0 LON London*
+ 1 PAR Paris*
+ 1 ROM Rome*
+ 1 BER Berlin*
+ 2 IST Istanbul*
+ 3 MOW Moscow*
+ 4 DXB Dubai
+ 5 KHI Karachi
+ 6 DAC Dacca
+ 7 BKK Bangkok
+ 8 BJS Beijing
+ 9 TYO Tokyo
+10 SYD Sydney*
+11 NOU Noum a
+12 WLG Wellington*
–10 HNL Honolulu
– 9 ANC Anchorage*
– 8 LAX Los Angeles*
– 7 DEN Denver*
– 6 CHI Chicago*
– 5 NYC New York*
– 4 CCS Caracas
– 3 RIO Rio de Janeiro*
– 1 PDL Azores*
D
C
A
B
D
C
A
“ON”/“OFF”
(Alarm
engagement/
disengagement
mark)
B
Types of characters
The following characters can be used to enter
the memo.
English capital letters: A B C D E F G H I
J K L M N O P Q R S T U V W X Y Z
Numerals and symbols: 1 2 3 4 5 6 7 8 9 0
! ? @ # + / = % ' " < > – _ : ; · , .
To display the memo
After selecting the memo channel containing
the desired memo, press button “D”. The
entered memo scrolls once, and then, its first
four characters remain displayed.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. Only “PM” mark is displayed and
there is no indication for the AM setting.
In the 24-hour indication, “24H” is displayed.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the ALARM
mode in 2 minutes.
Engagement/disengagement of the
alarm and hourly time signal
With each press of button “C” in the ALARM
mode, the engagement and disengagement
of the alarm and hourly time signal are
made as follows.
Hourly time
signal mark
Alarm mark
1
2
3
4 Neither engaged
Alarm engaged
Both engaged
Hourly time signal engaged
The alarm rings at the designated time for
20 seconds and stops. To stop it manually,
press any of the buttons.
The alarm can be tested by keeping button
“C” pressed in the ALARM mode.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus W160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus W160 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info