602219
17
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
15
FAQs and Troubleshooting
Linksys DPC3008/EPC3008
FAQs and Troubleshooting
Frequently asked questions
Q. How do I configure TCP/IP protocol?
To configure TCP/IP protocol, you need to have an Ethernet Network
Interface Card (NIC) with TCP/IP communications protocol installed on your
system. TCP/IP is a communications protocol used to access the Internet.
This section contains instructions for configuring TCP/IP on your Internet
devices to operate with the modem in Microsoft Windows or Macintosh
environments.
TCP/IP protocol in a Microsoft Windows environment is different for each
operating system. Follow the appropriate instructions in this section for
your operating system.
To configure TCP/IP on Windows 7 systems
1.
Open Network Connections by clicking Start, then clicking Control Panel.
2.
In the Search box, type adapter, and then, under Network and Sharing
Center, click View network connections.
3.
Right-click the connection that you want to change, and then click
Properties. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation. The Local Area
Connection Properties window opens.
4.
Click the Networking tab.
5.
Under This connection uses the following items, click either Internet
Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/
IPv6), and then click Properties.
6.
To specify IPv4 IP address settings, do one of the following:
To get IP settings automatically using DHCP, click Obtain an IP
address automatically, and then click OK.
To specify an IP address, click Use the following IP address, and then,
in the IP address, Subnet mask, and Default gateway boxes, type the IP
address settings.
7.
To specify IPv6 IP address settings, do one of the following:
To get IP settings automatically using DHCP, click Obtain an IPv6
address automatically, and then click OK.
To specify an IP address, click Use the following IPv6 address, and
then, in the IPv6 address, Subnet prefix length, and the Default gateway
boxes, type the IP address settings.
8.
To specify DNS server address settings, do one of the following:
To get a DNS server address automatically using DHCP, click Obtain
DNS server address automatically, and then click OK.
To specify a DNS server address, click Use the following DNS server
addresses, and then, in the Preferred DNS server and Alternate DNS
server boxes, type the addresses of the primary and secondary DNS
servers.
9.
To change advanced DNS, WINS, and IP settings, click Advanced.
10.
When you are finished, click OK.
11.
Try to access the Internet. If you cannot access the Internet, contact your
service provider for further assistance.
To configure TCP/IP on Windows XP Systems
1.
Click Start, and depending on your Start menu setup, choose one of the
following options:
If you are using the Windows XP default Start Menu, select Connect
to, choose Show all connections, and then go to Step 2.
If you are using the Windows XP Classic Start Menu, select Settings,
choose Network Connections, click Local Area Connection, and
then go to Step 3.
2.
Double-click the Local Area Connection icon in the LAN or High-Speed
Internet section of the Network Connections window.
3.
Click Properties in the Local Area Connection Status window.
4.
Click Internet Protocol (TCP/IP), and then click Properties in the Local
Area Connection Properties window.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Linksys DPC3008 Cable Modem bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Linksys DPC3008 Cable Modem in de taal/talen: Engels als bijlage per email.

De handleiding is 3,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info