693633
58
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
58
4. Set both tracks' outputs, as well as the DAW Master output,
to Helix USB 1/2 to allow all tracks to play back through Helix.
NOTE: Setting the stereo track's output to Helix USB 1/2 allows you to hear
your Helix-processed tone via the Helix hardware monitoring while record-
ing.Forthisconguration,disablesoftwaremonitoringonallDAWtracks.
5. Arm both these DAW audio tracks, hit the Record button and
start laying down your guitar performance!
Now you have your Helix-processed track to hear with the project, and a separate DI
track with which you can further experiment at any time with DAW plug-ins and/or re-
amping (see the next section).
Re-amping Through Helix
If your DAW software provides options for routing individual audio tracks to outputs
other than just the main Helix USB Out 1/2, then you can use these steps for re-amp-
ing a dry recorded DI track back through Helix.
1. In your DAW software, set the DI track's Output setting to a
Helix stereo USB Out other than USB Out 1/2. For this example
we'll use Helix USB Out 3/4.
2. Create a new stereo track in your DAW project and set this
track's Input and Output both to USB 1/2 - Let's name this
track "Re-amped." Arm the track for recording.
NOTE: In some DAW software it may be necessary to also activate the
software monitoring feature on this "re-amped" track to monitor the Helix-
processed signal when playing back your project. See your software's docu-
mentation.
3. On Helix, select the Input block and set it to receive from the
same USB stereo pair (USB In 3/4) and keep the Output block
set to "Multi." Load your choice of amps and eects on the
current Helix preset.
16B Dream Rig Duet
FeedbackTime
[37%]
Delay Harmony Delay
LevelMixKeyScale
0.0 dB40%MinorD1/8
DRY DI GUITAR
USB
RE-AMPED GUITAR
TRACK 1 (Dry DI Guitar)
T
RA
C
K
2
(
Processed
G
uitar
)
TRACK 3 (Re-amped Guitar)
4. Now play your DAW project and you'll hear the DI track "re-
amped" through your Helix! Adjust the DI track's volume slider
to make sure the signal feeding into Helix is not too hot. Tweak
your Helix amp & eects as desired while listening with the
playback of your project mix.
5. Once you have your re-amplied guitar tone they way you like
it, Solo both the DI and re-amped tracks, rewind to the start of
the project and hit the DAW Record button, allowing it to cap-
ture the signal into the new re-amped track in real-time.
Allow the DI track to play to the end, stop recording and you've created your new re-
amped guitar track!
TIP: Note that you still have your original Guitar DI track, and you can repeat this
processtocreateadditionalre-ampedtrackswithdierentHelixsettings,add
plug-ins, blend with your original guitar track and more.
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Line 6 Helix Control bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Line 6 Helix Control in de taal/talen: Engels als bijlage per email.

De handleiding is 12,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Line 6 Helix Control

Line 6 Helix Control Gebruiksaanwijzing - Nederlands - 63 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info