693634
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
5. FX Footswitches - Footswitches (FS1FS5) toggle the FX Blocks
On or O, just like a board full of analog pedals. Each footswitch can
be assigned to a dierent FX Block per Preset, as indicated by the
colored LED surrounding each footswitch. The LED colors indicate:
Yellow (Compressor & Stomp), Blue (Modulation), Purple (Synth),
Green (Delay), Orange (Reverb), White (Looper) and Turquoise (FX
Loop). When pressing one of these footswitches, you’ll also see its
assigned Block description and On/O state momentarily shown
in the LCD display. All FS1FS5 footswitch assignments can be
created and edited using the Firehawk Remote app. See the
following Firehawk Remote App section for details.
6. Preset & Bank Select Footswitches - Firehawk FX comes loaded
with 128 Presets, comprised of 4 Preset locations (AD) stored
within each of the Banks (132). The LCD display shows the Bank
number, location and title of the currently loaded Preset.
01B Lead
the
Way
LCD display showing Bank, Preset location and title
Each Preset stores all of the Amp and FX parameter settings that
dene the characteristics of the tone, Footswitch & Controller
assignments and FX Loop settings. Use the Bank and Preset Select
footswitches to load and save Presets on Firehawk FX.
NOTE: An unlimited number of Presets can be downloaded, created,
edited, saved and rearranged on your device using the mobile app!
See more details in the following Firehawk Remote App section.
To Load a Preset: Press one of the four Preset Select footswitches
(AD) to load the Preset within the current Bank. The red LED around
the footswitch indicates your current selection.
To Load a Preset that Resides in a Dierent Bank: Select the
Bank, then choose the Preset Select footswitch. Use the Bank Up
and Bank Down footswitches to navigate through Banks. Once
you’ve reached the desired Bank (as indicated in the ashing LCD
Display) press one of the Preset Select footswitches (AD) to load
the desired Preset within the Bank. The Bank select functionality will
time out after 5 seconds if no footswitch is selected.
Preset Status Indicator: Whenever you change an Amp or FX
setting from its original value, a dot appears between the Preset's
location number and title within the LCD Display indicating that the
Preset is now in an “unsaved” state. You’ll want to Save to retain
your changes to the Preset.
05C
.
Tone 4 Days
A "dot" indicates an "unsaved" Preset state
To Save a Preset: Press and hold the lit footswitch that indicates
your current selection to enter Save Mode. An arrow character
appears at the left of the LCD Display and the entire display ashes
to indicate you are in Save Mode. To exit Save Mode without making
any changes, wait 5 seconds without touching any controls and the
process will time out and exit automatically.
>
05CTone 4 Days Days
A ashing display and an "arrow" at the left indicates Save Mode
To Save the Edited Preset to the Preset’s Existing Location:
Simply press and hold the same Preset Select footswitch again.
Once the display stops ashing, your edited settings are saved,
overwriting the former Preset in the location.
To Save to a Dierent Bank and Preset Location: While in Save
Mode, navigate to the desired Bank and Preset location by tapping
the Bank Up/Bank Down footswitch, and then tapping the Preset
Select footswitch for your preferred Preset location. The location
number and title of the Preset that currently resides in this location is
shown in the ashing LCD Display. Press and hold the Preset Select
footswitch assigned to this location to replace the location’s current
Preset with your edited Preset. The LCD will stop ashing and the
title of your new, saved Preset will be displayed.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Line 6 Firehawk FX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Line 6 Firehawk FX in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Line 6 Firehawk FX

Line 6 Firehawk FX Gebruiksaanwijzing - Nederlands - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info