697406
10
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
EN
ATTENTION !
• This product should be used for 12V AC/DC applications only.
• The receiver can be installed indoors and outdoors. (IP44)
The receiver can be operated with the remote control from a maximum distance of 40 metres in an open
eld.
• A maximum of 150W can be connected in an unlimited amount of 12V applications.
• The distance between receivers should be at least 0.5m.
• Place receiver at a height of 1 meter for optimum reception.
PLACING BATTERIES IN REMOTE CONTROL (166A)
• Insert 2 AAA batteries in the remote control as indicated on page 1.
CONNECTING THE RECEIVER
• The receiver can be placed anywhere in the 12V system to serve all 12V applications behind the receiver.
• Remove the transformer plug from the power point.
• Connect the receiver cable (1) to the 12V transformer or (main) cable.
• Connect the 12V applications or (main) cable to the output connector of the receiver (4).
• Insert the transformer plug in the power point.
PROGRAMMING REMOTE CONTROL AND RECEIVERS
Press the programming button on the receiver (2) and hold it down for 5 seconds. The red indicator light on
the receiver will start to ash (3).
Press the group switch button (5) on the remote control where the receiver needs to be programmed. The
indicator light (3) on the receiver stops ashing. The receiver has now been programmed under the number
of this group switch button.
Multiple receivers can be programmed under 1 group switch button. Up to 9 groups can be served inde-
pendently.
• The main switch button (6) on the remote control switches all receivers on or off at the same time.
The indicator light ring (7) on the remote control shows whether you switch applications on or off. When
you switch a receiver on, the indicator light ring ashes once; when you switch an application off, the light
ring ashes twice.
When you switch a receiver on, the indicator light (3) on the receiver will be on; when you switch a receiver
off, the indicator light on the receiver will go out.
To clear the receiver settings, press the programming button on the receiver (2) and hold it down for 15
seconds. The indicator light (3) will ash for 15 seconds. Once the light goes out, all settings will have been
cleared.
The remote control and receivers should work now. If not, do the following:
• Check whether the remote control batteries have been inserted correctly.
• Replace dead batteries in remote control.
• Check / test transformer continuity
• Check plug connections. Check the cable for an open circuit.
CONDITIONS OF GUARANTEE
We guarantee the perfect condition and function of this appliance. The guarantee is valid for 5 years
beginning from the date of sale to the end user. We will rectify all faults arising from defective materials or
manufacturing. The guarantee covers repair or replacement of the defective parts, subject to our approval.
The guarantee does not apply to damage to parts which are subject to wear and tear nor damage or defects
caused by improper use or incorrect maintenance. The guarantee only applies if the purchase receipt is sent
to the dealer together with the appliance. This guarantee does not affect your statutory rights.
MANUAL AND
SAFETY INSTRUCTIONS
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LightPro Outdoor receiver Remote Control 167A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LightPro Outdoor receiver Remote Control 167A in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info