697395
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Atik R2
User manual
Thank you for purchasing the Lightpro Atik R2.
This document contains the required information for
correct, efcient, and safe use of the product. Consult
the general manual of the Lightpro 12-volt system
and the user manual of your transformer for more
information about the set up and connection of your
light plan.
Read the information in this manual carefully before
using the product. Keep this manual near the product
for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Atik R2 is an LED spot for outdoor use.
The xture can be installed in a xed underground
with the included screws, or be placed in the ground
with the included ground tube. This product may only
be used as outdoor lighting in combination with the
Lightpro 12-volt system. Any alterations made to the
product may have consequences for the safety, gua-
rantee, and correct functioning of the product and/or
other parts of the system.
Specications
Product Lightpro Atik R2
Article number 187U
Power (max.) 9W
Luminous ux 65 – 750 lm
Dimensions (H x Ø) 115 x 120 mm
Protection class IP67
Ambient temperature -20°C to 50°C
Cable length 1m
Dimmable Yes, with built-in dimmer
INSTALLATION
Packaging content
[Figure A]
1. Fixture Atik R2
2. Ground tube
3. Lightpro connector
4. Alternative reector
Check if all parts are present in the packaging. For
questions about parts, service, and any complaints or
other remarks, you can always contact us. E-mail: info@
lightpro.nl
Option 1: placement in de ground
[Figure B]
1. Place the ground tube in the ground.
2. Place the xture in the ground tube.
The push button for setting the built-in dimmer is
located at the underside of the xture. To control the
dimmer, the xture has to be (temporarily) removed
from the ground tube. When installing, sufcient cable
length has to be reserved to be able to reach the
dimmer.
Option 2: placement in a xed underground
[Figure C]
1. Drill a hole (Ø100 mm) in the underground.
2. Place the tting in the drilled hole. The ground tube
does not need to be used.
ADJUSTING BEAM DIRECTION AND/OR CHAN-
GING THE REFLECTOR
The pre-installed reector has a beam angle of 60°.
If desired, it can be replaced by the included alterna-
tive reector, which has a beam angle of 23°.
[Figure D]
1. Unscrew the cover ring.
2. Remove the cover ring from the xture.
[Figure E]
1. Unscrew the reector.
2. Remove the reector.
3. Place the alternative reector (Figure A [4]).
4. Fasten the reector.
[Afbeelding F]
The light source is secured in place by a spring
mechanism.
1. Pull the light source holder away from the xture,
putting tension on the spring.
2. Keep the spring in tension, and move the holder of
the light source to the desired position.
[Afbeelding G]
1. Place the cover ring on the xture.
2. Properly fasten the cover ring.
DIMMER FUNCTION
The xture is equipped with a built-in dimmer. The
light output can be set to 6 different levels.
[Figure H]
• Push the button to set the desired light output.
GB
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LightPro Atik R2 187U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LightPro Atik R2 187U in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info