552418
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
6. Install the Handlebar and Computer.
Remove four M5x12 Bolts (57) from the back of the
Computer (56).
Remove two M8x16 Bolts (41) and Ø20xØ8 Curve
Washers (42) from the Front Post (5).
Insert the Hand Pulse Sensor Wires (69) from the
Handlebar (6) into the hole on the Front Post (5) and
then pull them out from the top end of the Front Post
(5). Attach the Handlebar onto the Front Post (5)
with two M8x16 Bolts (41) and Ø20xØ8 Curve
Washers (42) that were removed.
Connect the Sensor Wire I (67) and Hand Pulse
Sensor Wires (69) to the wires that come from the
Computer (56) and then attach the Computer (56)
onto the top end of the Front Post (5) with four
M5x12 Bolts (57) that were removed.
7. Install the Seat Post, Seat Sliding Tube, and
Seat Cushion.
Slide the Seat Post Cover (98) onto the tube of the
Main Frame (1).
Insert the Seat Post (93) into the bushing on the tube
of the Main Frame (1) and then attach the Locking
Knob (95) onto the tube of the Main Frame (1) by
turning it in a clockwise direction to lock the Seat
Post (93) in the suitable position.
Adjusting the seat post:
Turn the Locking Knob (95) in a counterclockwise
direction until it can be pulled out. Pull out the Locking Knob (95) and then slide the Seat
Post (93) up or down direction to the suitable position. Lock the Seat Post (93) in place by
releasing the Locking Knob (91) and sliding the Seat Post (93) up or down slightly until the
Locking Knob (95) "pops" down into the locked position. For added safety, tighten the
Locking Knob (95) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of seat post cover.
Remove three M8 Nylon Nuts (24) and Ø16xØ8x1.5 Washers (25) from underneath of the
Seat Cushion (97). Then attach the Seat Cushion (97) onto the triangle plate of Seat
Sliding Tube (91) with three M8 Nylon Nuts (24) and Ø16xØ8x1.5 Washers (25) that were
removed.
Remove one Ø26xØ8x2 Big Washer (34) and M8 Round Knob (94) from underneath of the
Seat Sliding Tube (91) and then attach the Seat Sliding Tube (91) onto the Seat Post (93)
with one Ø26xØ8x2 Big Washer (34) and M8 Round Knob (94) that were removed.
Adjusting the seat cushion:
Release the Round Knob (94) and then slide the Seat Sliding Tube (91) forth or back
direction for the suitable position. Tighten the Round Knob (94) after adjustment.
5
56
67
57
69
42
41
6
69
93
98
95
1
97
34
94
91
25
24
6
7
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LifeGear Streamline Plus - Two In One Elliptical Bike 93566 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LifeGear Streamline Plus - Two In One Elliptical Bike 93566 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info