805282
38
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Defect Cause Remedy
The appliance was opened too
frequently or for too long
uWait to see whether the required temperature resets itself
by itself. If not, contact Customer Service
(see 9.4 Customer service) .
The temperature is incorrectly set uSet to a colder temperature and check after 24 hours.
The appliance is too near to a heat
source (stove, heater etc).
uChange location of appliance or the heat source.
The status display
does not turn on.
The status display is switched off. uSwitch on the status display .
The door is open. uClose the door.
The appliance is switched off. uSwitch on the appliance.
The LED is defective. uContact Customer Service (see 8 Maintenance) .
The door seal is
defective or
should be
replaced for other
reasons.
The door seal is interchangeable.
You can replace it without the use of
any special tools.
uContact Customer Service (see 9.4 Customer service) .
The appliance is
iced up or conden-
sation is building.
The door seal may have slipped out
of its groove.
uCheck the door seal is well placed in the groove.
The outside
surfaces of the
appliance are hot*.
The heat of the refrigerant circuit is
used to prevent condensate from
forming
uThis is normal.
9.3.2 Equipment
Defect Cause Remedy
The interior light
does not turn on.
The appliance is not switched on. uSwitch on the appliance.
The door was open for longer than
15 min.
uThe interior light automatically switches itself off if the door
stays open for approx. 15 min.
The LED interior light is faulty or the
cover is damaged: WARNING
Risk of injury from electrical shock.
Live parts are under the cover.
uThe LED interior light should only be replaced or repaired by
the Customer Service department or by engineers trained to
do so.
9.4 Customer service
First check if you can fix the error yourself (see 9 Customer
support) . If this is not the case, please contact customer
service.
Please refer to the enclosed “Liebherr Service” brochure for the
address.
WARNING
Unprofessional repair!
Injuries.
uRepairs and work on the appliance and the power supply
cable not described in the Manual (see 8 Maintenance)
should only be carried out by a qualified service provider.
uA damaged power cable may only be replaced by the manu-
facturer, the manufacturer’s Customer Service or a similarly
qualified person.
uFor appliances with an IEC connector, the change can be
made by the customer.
9.4.1 Contact Customer Service
Make sure to have the following appliance information to hand:
qAppliance name (model and index)
Customer support
18 * Depending on model and options
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Liebherr SFNbde 5227 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Liebherr SFNbde 5227 in de taal/talen: Engels als bijlage per email.

De handleiding is 8.6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Liebherr SFNbde 5227

Liebherr SFNbde 5227 Gebruiksaanwijzing - Nederlands - 26 pagina's

Liebherr SFNbde 5227 Gebruiksaanwijzing - Deutsch - 46 pagina's

Liebherr SFNbde 5227 Gebruiksaanwijzing - Français - 50 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info