804812
23
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
Defect Cause Remedy
The appliance
builds up too much
ice or condensa‐
tion.
The door seal may have slipped out
of its groove.
uCheck that the door seal is well fitted in the groove.
The appliance is
hot to touch on the
outside*.
The heat of the refrigeration circuit
is used to avoid condensation.
uThis is normal.
9.3.2 Features
Defect Cause Remedy
The internal light
does not come on.
The appliance is not switched on. uSwitch the appliance on.
The door was open for longer than
15 minutes.
uInterior lighting turns off automatically after approx. 15
min. with the door open.
The LED interior light is faulty or
the lid is damaged.
uContact customer service (see 9.4 Customer Services) .
9.4 Customer Services
First check if you can fix the error yourself (see 9 Customer
help) . If you can't, contact Customer Services.
Please refer to the enclosed “Liebherr-Service” brochure for
the address.
WARNING
Unprofessional repair!
Injuries.
uHave any repairs and action - not expressly specified -
on the appliance and mains cable carried out by service
personnel only. (see 8 Maintenance)
uA damaged mains cable may only be replaced by the
manufacturer, the manufacturers Customer Service or a
similarly qualified person.
uIn the case of appliances with an IEC connector, the
change may be made by the customer.
9.4.1 Contact Customer Services
Make sure you have the following appliance data at the
ready:
qAppliance name (model and index)
qService no. (Service)
qSerial no. (S no.)
uLook up the appliance information on the display
(see Info) .
-or-
uReferring to appliance info on the nameplate
(see 9.5 Model plate) .
uNote down the appliance information.
uNotify Customer Services of the following: Give us the
appliance data.
wThis will help us to provide you with a faster, more accu‐
rate service.
uFollow any further instructions given by Customer Serv‐
ices.
9.5 Model plate
The model plate is behind the drawers on the inside of the
appliance.
Fig. 51
(1) Appliance description (3) Serial no.
(2) Service no.
uNote the data on the model plate.
10 Shutting down
uEmpty the appliance.
uTurn off the appliance .
uRemove mains connector.
uRemove appliance connector if required: Remove and
move from left to right at the same time.
uClean the appliance (see 8.4 Cleaning the appliance) .
uLeave the door open to avoid bad smells building up.
11 Disposal
11.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐
ances. In the EU, for environmental reasons,
legislation obliges the end user to remove
these batteries before disposing of old appli‐
ances. If your appliance contains batteries, a
corresponding notice is attached.
Shutting down
* Depending on model and options 23
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Liebherr CNd 5734 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Liebherr CNd 5734 in de taal/talen: Engels als bijlage per email.

De handleiding is 6.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Liebherr CNd 5734

Liebherr CNd 5734 Gebruiksaanwijzing - Nederlands - 26 pagina's

Liebherr CNd 5734 Gebruiksaanwijzing - Deutsch - 26 pagina's

Liebherr CNd 5734 Gebruiksaanwijzing - Français - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info