7
speaker disconnects from docking station, the white connection indicator
light will flash.
HEADPHONE CONNECTION
Connect the headphones to the Headphone jack(Ref.8) of the device.
General operation
TURNING THE UNIT ON
Rotate the dial(Ref.6) clockwise to turn on the unit, the connection indicator
light (white color Ref.1) of main speaker is ON.
ADJUSTING THE VOLUME
The volume can be adjusted during playing via volume control(Ref.6).
Attention
Check the safety and user instruction of the external device before
connection.
NETWORK STANDBY:
1. The equipment will enter network standby mode after approx. 15
minutes with < 0.8 W power consumption.
2. To resume playback, rotate the dial (Ref.6) counterclockwise to off, then
turn it back on to restore sound.
TV AUDIO
Connect your TV via an Optical cable (Ref.10), an HDMI cable (Ref.11), or an
AUX cable (Ref.12).
IMPORTANT: if you connect the Lenco WTVS-100 by HDMI or OPTICAL
Cable
If you connect the WTVS-100 with optical or HDMI cable to your TV, you
need to select the audio output of the TV to HDMI ARC or eARC or Optical
and also put the digital audio settings of your TV to PCM output. If you do