477353
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
More features
A. Sleep function
1. Press the “ Sleep ” button on the remote control. “SLP-90 “ will be shown on the LCD display (3).
2. Repeatedly press this button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes respectively. The sleep
icon “ ” will be shown on the LCD display.
3. The system will stop and go to standby mode automatically after the selected time.
4. To cancel the sleep mode, press the “ Sleep button until “SLP-off’ is being displayed and the “ “ indicator disappears
from the LCD display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB or SD mode respectively.
1. Press and hold the Alarm ” button(6) to enter the alarm setting mode. The first digits of the clock will flash together with
the alarm icon .
2. Press Skip Up / Down button (19) to set the hour. Next press the “ Alarm ” button (6) again to confirm.
3. Press the Skip Up / Down button (19) to set the minutes and press the Alarm button (6) to confirm the
alarm time.
4. Press the Skip Up / Down button (19) to select the wake up mode(TUNER/CD/USB/SD CARD) and press
the “ Alarm “ button (6) to confirm.
5. Press the “ Volume “ button (4) to adjust the wake up volume level.
6. Press the “ Alarm “ to complete the alarm setting.
Remarks:
If there is no music source being detected (such as CD or USB) when the alarm time is reached, the system will go to
“ Tuner ” mode automatically. The system will play the previous selected radio frequency.
In “ Tuner mode “ wake up, the system will play the previous selected radio frequency.
The programming mode will automatically stop if no button is being pressed in a period of about 4 seconds.
During the “alarm on” mode, pressing the “On/Standby“ button(10) will switch off the system.
Active/de-active timer function
1. To activate the alarm function, press the “ Alarm ” button (6) repeatedly until the alarm indicator is shown on the
LCD display (7).
2. To cancel the alarm function, press again the “ Alarm” button (6) until the alarm indicator ” disappears.
C. Mute function (on Remote)
Press to terminate the sound output from speakers temporarily and press again to resume normal playback. When active, the
“MUTE” indication will continue flashing on the LCD display.
D. Pre-set EQ function
This unit provides 4 different sound modes to enhance your listening experience. You can select the desired effect by pressing
the “ Preset EQ ” button (11) repeatedly in the following sequence:
FLAT CLASSIC ROCK POP JAZZ
E. Display time function
Press the “ Display/ID3 “ button (8) when the unit is on at any mode. The LCD display (3) will show the current time.
F. Snooze function
During the alarm on mode, press the Snooze button(7) once to terminate the alarm mode temporarily. The unit will alarm
again after 9 minutes. To cancel the alarm, press the Alarm (6) button or the “ On/Standby “ button (10) while the system is on.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, etc. to this system with an
audio cord with RCA plugs (not supplied).
Connect one end of this cord to the external device and the other end to the Aux-in jack (24) on the back of the unit.
When connected, select the Aux mode by the “ Function “ button (5).
E-5
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lenco MC-146 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lenco MC-146 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lenco MC-146

Lenco MC-146 Gebruiksaanwijzing - Nederlands - 7 pagina's

Lenco MC-146 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info