110590
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
10
The Sleep timer allows you to set the unit that automatically turn off the Radio
after a selected sleep time.
- To activate the sleep timer and select the sleep time, press the SLEEP
button repeatedly. The sleep time available for choosing are:15, 30, 45,
60, 75 and 90 minutes. The display will show the indicator "SLEEP".
- To switch off the sleep timer, press SLEEP button repeatedly until the
"SLEEP" indicator disappears.
- To switch off the unit before the selected time, press the POWER button
once.
Sleep Timer
11
RESET
RESET button
Care and Maintenance
Do not subject the unit to excessive force, shock, dust or extreme temperature.
Do not tamper with the unit's internal components.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
Resetting the Unit
If the unit is subjected to a severe power surge or electric shock, it is possible
that the internal microcontroller may “lock up” and the unit will not respond to
any commands from the top panel controls.
1. In this event, unplug and then reconnect the AC power plug into the wall
outlet.
2. Use a straightened paper clip, toothpick, or similar blunt object to press the
RESET button located at bottom of the main unit (see figure below). The
reset operation clears the system memory and all of your previous settings
will be erased.
Caution: DO NOT use a sharp, pointed object to press the RESET button.
It may damage the reset switch inside the unit.
Rainbow Light Lampshade
The unit has a special feature that its lampshade with rainbow light.
you may activate the rainbow light by sliding the RAINBOW LIGHT switch
to LO or HI position.
EngEng
To enable / disable alarm function
8. To enable alarm function, press the AL1 (AL2) button and the alarm
indicator AL1 (AL2) and light effect indicator (if selected) display.
To disable alarm function, press the AL1 (AL2) button until both the alarm
AL1 (AL2) and light effect indicators are OFF from the display.
Wake to Buzzer (the ALARM SOURCE switch is set to BUZZER position)
When the alarm time is reached, the Buzzer will sound for 3 minutes then
enter auto-snooze mode.
Wake to Radio (the ALARM SOURCE switch is set to RADIO position)
When the alarm time is reached , the alarm will wake up to the tuned radio
station and play for 30 minutes.
Wake to Melody (the ALARM SOURCE switch is set to MELODY position)
When the alarm time is reached , the selected melody (sound effect) will
sound for 30 minutes.
When the alarm sounds, the" rainbow colour" or the "sunlight" light up the
lampshade, if alarm light effect was previously set.
Note : If "sunlight" is selected, the sunlight turns on (max. 30 minutes)
before the set alarm time.
You may activate the snooze function manually after the alarm sounds by
pressing the SNOOZE button. The snooze time is approximately 10 minutes.
The snooze operation can be repeated 3 times.
After the alarm sounds, you may also slide the ALARM SOURCE switch ,
press any button (except the SNOOZE button) on the lampshade , press
BAND button or POWER button to stop the alarm immediately. It will reset
itself for the following day.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lenco CRW-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lenco CRW-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lenco CRW-2

Lenco CRW-2 Gebruiksaanwijzing - Nederlands - 15 pagina's

Lenco CRW-2 Gebruiksaanwijzing - Deutsch - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info