680891
142
Verklein
Vergroot
Pagina terug
1/2025
Pagina verder
3.20 Addition(s) to LCOS 8.84
3.20.1 Default Rollout Wizard
Your device is supplied with a preconfigured Rollout Wizard, which allows you to retrieve a configuration from a
LANCOM
Large Scale Rollout & Management (LSR)
server with just a few clicks. The Default Rollout Wizard runs if you have
enabled the Rollout Wizard in LCOS but have not set up a customized Rollout Wizard.
The Default Rollout Wizard asks you for all the information that it needs to connect to the LSR. This includes:
1
The protocol used for the connection (HTTP or HTTPS);
1
The IP address or the DNS name of the LSR server;
1
The user name and password for authentication against the LSR;
1
The name or number of the rollout project;
1
The device ID (optional); and
1
The rollout TAN for the device.
4
This process can be partially or even fully automated if you enter the relevant information into the device
permanently. The table for this is located in the Setup menu under HTTP > Rollout-Wizard > Presets. Standard
presets are the port and the loopback address used by the Wizard.
4
If your device has a USB port, its automatic upload feature allows a USB stick to supply an unconfigured device
with the basic information required by the Rollout Wizard.
Before the device starts processing the rollout, the wizard displays a summary of the connection data used. Also, the
device uses an ICMP echo request (ping) to determine whether the specified server is available. If this test fails, you have
the option to re-configure the wizard or to continue the rollout process anyway. The host is available, the device begins
with the retrieval of a configuration from the LSR.
5
If the LSR server can be accessed via the Internet, but you are running the Rollout Wizard on a device without
an Internet connection, you must first execute the Internet Setup Wizard.
Additions to the Setup menu
Presets
This table enables you to predefine the values for all of the parameters that are requested by the Default Rollout Wizard.
Parameters configured in this way are no longer queried when you run the Default Rollout Wizard.
5
A 'blank' predefined value for Port and for Source loopback address will be interpreted by the device as the
entry 'Auto'. In this case, the Default Rollout Wizard uses the corresponding HTTP(S) standard port and, as the
loopback address, the address of your device that matches to the target. If you are working with different ARF
networks, you must use the loopback address to specify the ARF where the LSR server is located.
Telnet path:
Setup > HTTP > Rollout-Wizard
Name
This entry shows the name of the parameter to be filled out with preset values.
Telnet path:
Setup > HTTP > Rollout-Wizard > Presets
142
Reference Manual
3 Configuration
142

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lancom LCOS 9.10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lancom LCOS 9.10 in de taal/talen: Engels als bijlage per email.

De handleiding is 54,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info