680891
122
Verklein
Vergroot
Pagina terug
1/2025
Pagina verder
Telnet path: /Setup/Autoload/Network/Firmware
2.60.1.1.1 Condition
This is where you select the condition under which the firmware specified under /Setup/Autoload/Network/Firmware/URL
will be uploaded when the command LoadFirmware is executed.
Telnet path: /Setup/Autoload/Network/Firmware
Possible values:
1
Unconditionally: The firmware will always be uploaded to and executed from the memory location of the inactive
firmware. This setting deactivates version checking and the firmware specified will be uploaded in every case.
1
If different: The firmware is uploaded to and executed from the memory location for the inactive firmware if it is of
a different version to the firmware active in the device and the inactive firmware. If the specified firmware is of the
same version as one of the two existing firmware versions, then the firmware will not be uploaded. The LoadFirmware
command compares the firmware version (e.g. "8.10"), the release code (e.g. "RU1") and the file date.
1
If newer: The firmware is uploaded and executed only if it is newer than the firmware currently active in the device.
The firmware is only uploaded to the memory location for the inactive firmware if it is newer than the active and
inactive firmware versions on the device. If the specified firmware is older than one of the two existing firmware
versions, then it will not be uploaded.
Default: Unconditionally
5
If the command LoadFirmware is executed twice in succession with the setting "unconditionally", both memory
locations will contain the same firmware version.
2.60.1.1.2 Minimum version
Specify the minimum version of the firmware to be loaded over the network.
Telnet path: /Setup/Autoload/Network/Minimum-Version
Possible values:
1
Max. 14 characters
Default: Blank
5
Firmware versions with a lower version number will be ignored.
2.60.1.1.3 URL
Specify the URL of the firmware that is to be uploaded over the network using the LoadFirmware command.
Telnet path: /Setup/Autoload/Firmware/URL
Possible values:
1
Max. 127 characters beginning with "tftp://", "http://" or "https://"
Default: Blank
5
The TFTP or HTTP(S) client loads the file entered here only if the LoadFirmware command is entered without a
URL as a parameter. A specific file at a known location can be loaded by entering its URL as a parameter.
2.60.1.2 Configuration
This menu is used to configure the automatic uploading of a configuration over the network.
Telnet path: /Setup/Autoload/Network/Configuration
122
Reference Manual
3 Configuration
122

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lancom LCOS 9.10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lancom LCOS 9.10 in de taal/talen: Engels als bijlage per email.

De handleiding is 54,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info