680927
101
Verklein
Vergroot
Pagina terug
1/270
Pagina verder
LANCOM ES-2126+ and LANCOM ES-2126P+
쮿 Chapter 4: Operation of Web- based Management
100
EN
The figure shows the procedure of 802.1x authentication. There are steps for
the login based on 802.1x port access control management. The protocol
used in the right side is EAPOL and the left side is EAP.
At the initial stage, the supplicant A is unauthenticated and a port on
switch acting as an authenticator is in unauthorized state. So the access
is blocked in this stage.
Initiating a session. Either authenticator or supplicant can initiate the
message exchange. If supplicant initiates the process, it sends EAPOL-
start packet to the authenticator PAE and authenticator will immediately
respond EAP-Request/Identity packet.
The authenticator always periodically sends EAP-Request/Identity to the
supplicant for requesting the identity it wants to be authenticated.
If the authenticator doesn’t send EAP-Request/Identity, the supplicant will
initiate EAPOL-Start the process by sending to the authenticator.
And next, the Supplicant replies an EAP-Response/Identity to the authen-
ticator. The authenticator will embed the user ID into Radius-Access-
Request command and send it to the authentication server for confirming
its identity.
After receiving the Radius-Access-Request, the authentication server
sends Radius-Access-Challenge to the supplicant for asking for inputting
user password via the authenticator PAE.
The supplicant will convert user password into the credential information,
perhaps, in MD5 format and replies an EAP-Response with this credential
information as well as the specified authentication algorithm (MD5 or
OTP) to Authentication server via the authenticator PAE. As per the value
of the type field in message PDU, the authentication server knows which
algorithm should be applied to authenticate the credential information,
EAP-MD5 (Message Digest 5) or EAP-OTP (One Time Password) or other
else algorithm.
If user ID and password is correct, the authentication server will send a
Radius-Access-Accept to the authenticator. If not correct, the authentica-
tion server will send a Radius-Access-Reject.
When the authenticator PAE receives a Radius-Access-Accept, it will send
an EAP-Success to the supplicant. At this time, the supplicant is authori-
zed and the port connected to the supplicant and under 802.1x control is
101

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lancom ES-2126P plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lancom ES-2126P plus in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lancom ES-2126P plus

Lancom ES-2126P plus Gebruiksaanwijzing - Deutsch - 284 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info