680927
92
Verklein
Vergroot
Pagina terug
1/270
Pagina verder
LANCOM ES-2126+ and LANCOM ES-2126P+
쮿 Chapter 4: Operation of Web- based Management
91
EN
Bridge by calculating the sum of path cost contributed by all ports on
this path. A port with a smaller path cost value would become the
Root Port more possibly.
Configured Path Cost: The range is 0 – 200,000,000. In the switch, if
path cost is set to be zero, the STP will get the recommended value
resulted from auto-negotiation of the link accordingly and display this
value in the field of Path Cost Status. Otherwise, it may show the value
that the administrator set up in Configured Path Cost and Path Cost
Status.
802.1w RSTP recommended value: (Valid range: 1 – 200,000,000)
10 Mbps : 2,000,000
100 Mbps : 200,000
1 Gbps : 20,000
Default: 0
Priority: Priority here means Port Priority. Port Priority and Port Num-
ber are mixed to form the Port ID. Port IDs are often compared in
order to determine which port of a bridge would become the Root
Port. The range is 0 – 240.
Default is 128.
Admin Edge Port: If user selects “Yes”, this port will be an edge port.
An Edge Port is a port connected to a device that knows nothing
about STP or RSTP. Usually, the connected device is an end station.
Edge Ports will immediately transit to forwarding state and skip the
listening and learning state because the edge ports cannot create
bridging loops in the network. This will expedite the convergence.
When the link on the edge port toggles, the STP topology keeps
unchanged. Unlike the designate port or root port though, an edge
port will transit to a normal spanning-tree port immediately if it recei-
ves a BPDU.
Default: No
Admin Point To Point: say a port is a point-to-point link, from RSTP’s
view, if it is in full-duplex mode but is shared link if it is in half-duplex
mode. RSTP fast convergence can only happen on point-to-point links
and on edge ports. This can expedite the convergence because this
will have the port fast transited to forwarding state.
There are three parameters, Auto, True and False, used to configure
the type of the point-to-point link. If configure this parameter to be
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lancom ES-2126P plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lancom ES-2126P plus in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lancom ES-2126P plus

Lancom ES-2126P plus Gebruiksaanwijzing - Deutsch - 284 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info