719233
5
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
5 / 32 English
EN FR NL DE ES PL CS SK SL BG
-  massage areas (shoulders/upper back/
lower back/legs/feet)
- Heating function made up of  heating are-
as (shoulders/upper & lower back)
- Shiatsu pillow that can be used separately
- Removable acupressure mat
- Switches o automatically after  minutes
INSTRUCTIONS FOR USE
Positioning the device
Mattress and pillow:
You can also place the Delight Mattress on
your sofa or settee, your bed or even on the
ground if you wish.
1 First of all, connect the pillow to the
mattress by linking the male plug lo-
cated on the right-hand side of the pil-
low (Fig. 2, point 1) to the female sock-
et located in the top right corner of
the mattress (Fig. 2, point 2) and turn
the cap to x the link (Fig. 2, point 3).
2 First of all, connect the end of the
power cable to the female input
connector located on the right-hand
side of the pillow (Fig. 2, point 4/5).
3 Then connect the adapter to a
plug socket. Once connected
to the plug socket, the Delight
Mattress is ready for use.
Pillow only:
the Shiatsu pillow can be removed to use
on its own on any area of the body. To use
the pillow on its own, remove it from the
mattress by undoing the zip fastener and
disconnecting it from the mattress. Then
connect it according to the instructions
above, proceeding directly to stage .
The pillow has a system of straps so that you
can x it to any seat to go ahead with a back
massage. Just thread the straps across the
back of the backrest, joining them up and
x them to each other with a plastic buckle
and tighten around the backrest.
Acupressure mat:
To use the acupressure mat with optimum
comfort, x it to the mattress using Velcro
strips (Fig. ). You can use the Shiatsu func-
tion at the same time. You can also use the
acupressure mat on its own, placed on the
ground, for your back or feet.
Remote control (Fig. 1)
1 TO SELECT THE MASSAGE
AREA: SHOULDERS (SHIAT-
SU ROTATING HEADS)
2 TO SELECT THE MASSAGE
AREA: UPPER BACK
3 TO SELECT THE MASSAGE
AREA: LOWER BACK
4 TO SELECT THE MASSAGE AREA: LEGS
5 TO SELECT THE MASSAGE AREA: FEET
6 DISPLAYS THE PRE-SET MAS-
SAGE MODE SELECTED
7 DISPLAYS MASSAGE INTEN-
SITY LEVEL SELECTED
8 TO SELECT ON/OFF
9 TO SELECT THE MASSAGE
INTENSITY LEVEL
10 TO SELECT THE HEATING
FUNCTION (mattress)
11 TO SELECT THE PRE-SET
MASSAGE MODE
12 SHIATSU PILLOW ON/OFF BUTTON
13 TO SELECT THE SHIATSU
PILLOW’S HEATING FUNCTION
Vibrating mattress:
When activating the device with the ON/
OFF button, the pre-set mode 1 and me-
dium intensity are selected by default.
Choose another pre-set mode using
“Mode” button (11) or press the button
for one or more areas of the body to
stop the pre-set mode and activate the
vibration at their level (2 to 5).
You can change the intensity of the
vibration at any time by pressing the
“intensity” button (9).
Likewise, activate the heating button
on the highest intensity by pressing the
“heat” button once (10), on the lowest
intensity by pressing a second time and
disconnect it in the mattress by pressing
it a third time.
Shiatsu pillow:
The neck button (1) activates the Shiat-
su rotating heads located in the pillow
without stopping the pre-set mode. You
can then activate the Shiatsu at the same
time with a pre-set mode or one or more
areas of the body.
When the neck area is active, the heating
function is also applied to the Shiatsu
rotating heads. To turn it o in the neck
area while keeping it at the level of the
mattress, press the heating function
button of the pillow (13).
The rotation direction of the Shiatsu
heads changes every few minutes by de-
fault. To trigger a continuous direction,
press the pillow’s ON/OFF button once
or twice in the direction you want (12).
The Shiatsu pillow can be used sepa-
rately. The massage is then controlled
only with the two buttons located on
the pillow (12 and 13).
Press the ON/OFF button (12) once to
trigger the rotation, twice to change
direction, three times to change direc-
tion again and so on.
The heating function is turned on by de-
fault. Press the heating function button
of the pillow (13) to stop it.
To stop the massage, keep pressing the
ON/OFF (12).
MAINTENANCE
Cleaning
Unplug the mattress from the mains and
wait a few minutes before cleaning it.
Clean it using a soft, slightly damp
sponge.
Never let water or any other liquid come
into contact with the mattress.
Do not immerse in liquid to clean it.
Never use abrasive detergents, brushes
or a solvent to clean it.
Storage
Place the massage mattress in its box
and in a dry place away from direct
sunlight.
Avoid contact with sharp edges and
other pointed objects, which might cut
or pierce the fabric surface.
To prevent the power cable breaking
at any point, do not wind it round the
mattress.
Do not hang the mattress up by the
manual control lead or power cable.
BREAKDOWNS
AND SOLUTIONS
The massage is not active
for every area.
The vibrating motor is not
turned on for this area.
Press the button corresponding
to the area to turn the motor on.
The device suddenly stops.
The overheating protection
system is switched on.
Wait a few minutes before
starting the device again.
The device does not light up.
The overheating protection system
is always active and the device
needs to cool down again.
Wait for a few minutes again
before trying to get the device
going again. It may need more
time in warmer surroundings.
Check that the device is
properly connected.
See Fig.  to make the
missing connections.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lanaform LA110316 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lanaform LA110316 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Pools als bijlage per email.

De handleiding is 1,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info