187
ENGLISH
186
INSTALLER’S SETTING OPTIONS
h Ceiling height setting value
- 01: low
- 02: standard
- 03: high
- 04: very high
● Press and hold ‘wireless remote controller signal receiver part’ of the remote controller for 3
seconds or longer to enter the installer function.
● At the Code field select ceiling height setting code value ‘05’.
- You can press ‘▲’, ‘▼’ button to change the code value.
● In value1, use ‘▲’, ‘▼’ button to select ceiling height setting value, and then press ‘Done’ but-
ton to apply the ceiling height setting.
- If you do not press ‘Done’ button, your settings will not be applied.
Ceiling height selection (air conditioner)
This function adjusts the wind amount stages according to the ceiling height for the ceiling type
unit.
INSTALLER’S SETTING OPTIONS
● At the Value 1 field, press the ‘▲’, ‘▼’ button to select the sensor location setting value and
press ‘Done’ button to apply the indoor temperature detection sensor location setting.
- If you do not press ‘Done’ button, your settings will not be applied.
h Sensor location setting value
- 01: remote controller
- 02: indoor unit
- 03: 2TH
h 2TH function’s operation characteristics may be different for each product.
h If no buttons are pressed for about 60 seconds after the setting, it automatically exits from the
setting mode.
Temperature sensor location Function
Remote controller
Operate the system with wired remote
controller’s temperature sensor
Indoor unit Operate the system with indoor unit’s temperature sensor
2TH
Cooling
Compare the temperatures of the indoor unit and the wired remote con-
troller and operate with the higher temperature (There are system oper-
ated with lower temperature)
Heating
Compare the temperatures of the indoor unit and the wired remote con-
troller and operate with the lower temperature
