564216
10
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
12
. The percolation head, the filter holder
and the filters
These must be cleaned after every use. Simply
run a damp cloth over the percolation head
and clean the other accessories with water
and a small quantity of non-abrasive liquid
cleanser. Rinse and dry.
If the percolation head becomes heavily
encrusted, unscrew its grid using a coin,
clean it and replace, tightening it firmly (10).
. The seal for the percolation head
When you are not using your espresso, do not
leave the filter holder in the appliance in order
to prevent wear on the seal.
Clean the seal regularly using a damp cloth.
. The steam nozzle (h) must be cleaned with
a damp cloth after every use.
Please note: it may still be very hot!
For more thorough cleaning, the nozzle may
be taken off (11):
Unscrew the tip (h1), if necessary using a
coin, before removing the nozzle from the
appliance.
Unscrew the nozzle from the appliance using
the ring (h3). Separate the various
components and clean them with hot water
and a small quantity of non-abrasive liquid
cleanser. Rinse and dry.
If need be, unblock the tip (h1) using a fine
needle.
Be careful with the seal on the ring (h3)
when you replace the nozzle.
. The auto cappuccino accessory (l) :
After each use, we recommend that you rinse
the auto cappuccino accessory in the
following manner:
• Turn the selector (c) to the position «
».
• Turn the dial (l3) to the cleaning position
«
».
• Immerse the flexible tube (l4) into a glass of
water. (The minimum quantity necessary is
3,5 ounces/100 ml).
• Place an empty container below the outlet
nozzle (l5).
Once the appliance reaches the correct
temperature, the temperature control light (e)
will come on.
Then turn the selector (c) to the setting
«
».
When all the water has run through the
auto cappuccino accessory (l), turn the
selector (c) to the O position.
After use, remove the flexible tube (l4) from
the container.
Once this operation is completed, clean the
outlet nozzle (l5) with a damp cloth.
We recommend that you regularly dismantle
the auto cappuccino accessory (l) and clean it
with water, a little non-abrasive dishwashing
liquid and a small brush. Rinse and dry before
reassembling it (13).
Be careful to mount the flexible tube (l4)
the right way: engage the straight cut end
into the auto cappuccino accessory (l).
Following these maintenance guidelines will
keep your appliance in optimal working
condition and help you to produce great
tasting beverages time after time.
Descaling
It is vital that you descale your espresso
machine in order to guarantee its continued
operation.
Descale your espresso at regular intervals
using citric or tartaric acid.
We do, however, advise you to use the Krups
descaling accessory, reference 054, which
is available from approved Krups service
centres. This accessory includes, in addition to
two doses of descaler, a water hardness test
strip to evaluate the frequency of descaling
for your appliance in normal use. The amount
of scaling depends on the hardness of the
water, but also on how often it is used. The
frequency of descaling indicated by accessory
054 is thus given by way of indication only.
You must never, under any circumstances, use
classic sulphuric acid or other products
containing this acid as there is a risk of
damaging the appliance. Carefully check the
composition of the descaling products you
intend to use.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups F920 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups F920 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Krups F920

Krups F920 Gebruiksaanwijzing - Nederlands - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info