565309
19
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
ENDE
FR
NLESPTITELDANOSVFI
17
ENGLISH
The milk froth is not fine enough. We recommend that you use fresh, pasteurised or UHT milk,
recently opened; it is also recommended that you use a cold
container. Check that the level of milk in the cold container is
sufficient.
Check that the steam spout is securely tightened onto the hose.
Clean the steam nozzle (refer to chapter 6.1 milk foam).
The Auto-Cappuccino accessory
does not suck the milk (accessory
sold separately).
Some parts of your appliance can sometimes be hot, take care
not to burn yourself; let the machine cool down before handling.
Check that the flexible inlet is not blocked, obstructed or twisted
and that it is securely fitted into the accessory to avoid any air
intake.
Check that the accessory is correctly fitted to the appliance,
remove and refit it.
Make sure that the accessory is set in the right position, either
cappuccino or latte. Remove and clean the accessory (refer to
chapter 6.2 auto cappuccino).
Clean the accessory with a steam cycle and a container filled with
water. You can use the KRUPS XS4000 liquid cleaner available as
an accessory.
If the problem persists replace the part (see photo in chapter 6.2
auto cappuccino, part circled) with the replacement one supplied
with your machine.
After filling the water tank, the
warning message is still displayed.
Check that the tank is fitted correctly onto the coffee
machine.
Check that the float at the bottom of the tank moves freely.
Rinse the tank and descale if necessary.
The cleaning or descaling pro-
gramme will not start.
Unplug the appliance for 20 seconds then switch it back on.
After emptying the used coffee
collector, the warning message is still
displayed.
Remove the collector, ensure that it is empty, wait for 6 seconds
and fit it back in place.
Check that the collector is pushed in correctly.
After washing the cleaning drawer,
the warning message is still
displayed.
Remove the drawer, wait for 6 seconds and fit it back in place.
Check that the cleaning drawer is pushed in correctly.
The power has been cut off during a
cycle.
The appliance resets itself automatically when the power is swit-
ched back on and is ready for a new cycle.
There is water or coffee under or at
the back of the appliance.
Before removing the tank, wait 15 seconds after the coffee has
finished running so that the machine can complete its cycle
correctly.
The drip tray has overflowed: empty it and clean the cleaning
drawer.
Check that the drip tray is properly positioned, even when the ap-
pliance is not in use.
A message “Error code XX”
appears.
Unplug the appliance for 20 seconds, remove the Claris cartridge
and if required, put it back into service.
If the fault persists, note the fault number and contact
KRUPS Customer Service.
When you turn off the appliance,
warm water will come out of the
coffee exits.
According to the type of recipe prepared, the machine can carry
out an automatic rinsing operation when it is turned off. This cycle
lasts only a few seconds and stops automatically.
Always ensure the drip tray is correctly fitted in place.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups EA8321 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups EA8321 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Krups EA8321

Krups EA8321 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska, Norsk, Suomi - 194 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info