4428
20
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
21
The frothing aid can be disassembled in
order to clean it thoroughly, as follows:
Pull the two parts A + C from the small
metal tube B (24).
Wash out all three parts in warm water. If
the small suction orifice in part A is clogged,
it can be freed by poking a fine needle
through the blockage.
If the appliance is not to be used for a
lengthy period, do not insert the filter carrier
into the brewing head, as this causes the
sealing ring to be compressed
unnecessarily long and can thus impair its
useful life.
The measuring spoon and one filter sieve
can be stored in the depressions under the
lid.
Before a lengthy period of non-usage, the
heating system can be cleared of water by
driving it off as steam. Put a vessel under
the steam/hot water nozzle and turn the
valve knob to the position. As soon as
no more steam is generated, turn the valve
knob to position and switch off the
appliance.
Removal of limescale
The machine must have limescale removed
regularly. For an average usage of 4 cups
daily and hard water, we recommend
descaling the appliance every 3 months.
Before descaling, the brewing sieve on the
brewing head MUST first be screwed off.
1. Remove all lime and coffee residues
from the brewing sieve and the brewing
head.
2. Pull off the frothing aid.
3. Dissolve 2 tablespoonfuls of tartaric acid
or citric acid (both obtainable from
chemists and drugstores) in 1/2 litre of
lukewarm water and pour it into the
water container. Put one receptacle
under the brewing head and another
under the steam nozzle.
4. Switch on the appliance. After the
heating indicator lamp ceases to glow,
press the espresso key .
Make sure that the valve knob points to
the position.
5. Allow the descaling solution to pass
through until about half has run out of
the brewing head.
6. Press the espresso key once again.
7. Turn the valve knob to the position
and press the espresso key . Allow 1
cup of descaling solution to run through.
Then press the espresso key a further
time and return the valve knob to the
position.
Now leave the rest of descaling solution to
work for 10-15 minutes.
8. Press the espresso key and allow the
remainder of the descaling solution to
run through.
9. Press the espresso key once again.
Following this, press the espresso key
and allow 2 water containerfuls of clear
water to run through.
After that is done, fill the water container
again.
Turn the valve knob to the position,
press the espresso key and allow the
water run through. Then return the valve
knob to the position.
Switch off the appliance by pressing the
“on off“ key.
Allow the appliance to cool down. Insert the
brewing sieve into the brewing head again
and push the frothing aid onto the
steam/hot water nozzle.
Problems and possible
causes
PROBLEM:
Espresso leaking from the filter carrier.
CAUSE:
Filter holder not correctly inserted.
Filter holder has been left in the hot water
spout too long; clean the seal well.
No elasticity in the seal, it must be
replaced.
Time 888 GB 15.08.1997 15:33 Uhr Seite 21
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups CAFE EPRESSO CREMATIC TIMER F 888 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups CAFE EPRESSO CREMATIC TIMER F 888 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins, Alle talen als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Krups CAFE EPRESSO CREMATIC TIMER F 888

Krups CAFE EPRESSO CREMATIC TIMER F 888 Gebruiksaanwijzing - Nederlands - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info